Product Selection Guide Page 922 Product Selection Guide-11th Edition

PSG11 922 UNDERWATER Intended Use The 4426 base mount is designed for use in fountains, reflecting pools and for illuminating waterfalls. A non-dimming, one-color light output available in cool white, warm white, amber, blue, cyan, green, royal blue and red monochromatic colors. The system shall be composed of two components: 1) LED array board and 2) driver. The LED driver powers via constant current. With a constant current driver, LED lumen output does not change with temperature variations. Dynamic RGB: This unit uses a red, green and blue (RGB) underwater color-balanced LED array to create DMX controlled color changing lighting effects. Color control is achieved through four channels per fixture, standard DMX512 hardware,at a maximum of 44 frames per second. All channels have logarithmic power for finer color and intensity control. The fourth channel, intensity, allows the user to vary brightness without affecting the color. The integral power supply and DMX control modules are enclosed in an attached sealed bronze combination box. The proprietary DMX control module senses the LED temperature and adjusts the LED power accordingly to yield a lamp life of up to 50,000 hours of operation. This lamp life exceeds any other fixture designed for this use. For power and signal hook-up, the integral combination box includes a minimum of 10' of submersible rated power cable and a minimum of 10' of submersible rated DMX signal cable. Features amber and DMX512 RGB mixing available; Fully adjustable yoke for easy aiming per fixture RGB fixtures have an additional data cord Listings UL, CSA, CSAus, IP68. PRODUCT INFORMATION Fountain & Reflecting Pool Fixtures HYDREL 4426 BM LED Base Mount - Monochromatic LED Base Mount - Dynamic RGB Notes 1 Static channels all fixtures will be programmed with the same set of numbers, specify starting number. 2 Sequential-specify starting channel. ADDITIONAL INFORMATION For additional product information, visit 7 (17.8) 5-7/8 (14.9) 7-1/2 (19.0) 15-1/2 (39.4) 7-1/2 (19.0) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. Example: 4426 B 18LED WHT41K 120 SP FLC BM CSL50 Specifications subject to change. Series Material LED type LED color Voltage Distribution Lens Mounting 4426 B Bronze SWB Saltwater bronze 18LED 60W WHT30K 3000K, warm white WHT41K 4100K, neutral white WHT53K 5300K cool white AMB Amber BLU Blue GRN Green RED Red RGB Mixing 120 SP Spot NFL Narrow flood MFL Medium flood FL Flood WFL Wide flood VWFL Very wide flood FLC Flat lens clear BM Base mount Control Channel Cord set length RGB LED only 3DMX 3-channel DMX512 4DMX 4-channel DMX512 RGB LED only ST_ Static 1 SQ_ Sequential (specify starting channel) 2 CSL_ 10'-120' of cord available in 5' increments ORDERING INFORMATION Visit for color changing LED specifications.

Previous Page
Next Page