Product Selection Guide Page 806 Product Selection Guide-11th Edition

PSG11 806 LITHONIA LIGHTING OUTDOOR www.lithonia.com PRODUCT INFORMATION POLES Aluminum RTF Round Tapered Fiberglass Notes drilling. RTFDB Round Tapered Fiberglass, Direct Burial ADDITIONAL INFORMATION For ordering information, see page 786. For additional product information, visit www.lithonia.com. TECHNICAL INFORMATION EPA (FT 2 ) WITH 1.3 GUST (PLEASE SEE WIND MAP ON PAGE 788) CATALOG NUMBER NOM. MOUNT. HT. (FT.) POLE SHAFT SIZE (BASE IN. X TOP IN. X FT.) 80 MPH 90 MPH 100 MPH MAX. WT. (LBS.) APPROX. SHIP WT. (LBS.) RTFDB 18 6X 14 6.5 x 4.1 x 18 14.0 10.4 7.9 150 34 RTFDB 20 6-6X 16 6.7 x 4.1 x 20 10.0 7.4 5.5 100 38 RTFDB 24 6-7X 20 6.7 x 4.1 x 24 8.2 5.8 4.1 150 46 RTFDB 30 8-3X 25 8.2 x 4.5 x 30 6.2 4.7 3.6 100 71 RTFDB 30 8-4X 25 8.4 x 4.7 x 30 14.5 11.2 8.9 200 98 RTFDB 35 8-4X 30 8.4 x 4.7 x 35 10.5 8.0 6.2 200 116 RTFDB 35 8-5X 30 8.5 x 4.9 x 35 14.8 11.4 9.0 300 153 RTFDB 41 11-8X 35 11.8 x 6.4 x 41 14.3 10.8 7.8 300 218 INSTALLATION NOTES: Do not erect poles without having fixtures installed. If poles are stored outside, all protective wrapping must be removed immediately upon delivery to prevent finish damage. 18" 24" Hand hole Finish grade Wiring access PRODUCT INFORMATION Fiberglass ADDITIONAL INFORMATION For ordering information see page 786. For additional product information, visit www.lithonia.com. B 18" Notes side drilling. INSTALLATION NOTES: Factory- supplied templates must be used when setting anchor bolts. Lithonia Lighting will not accept claim for incorrect anchorage placement due to failure to use Lithonia Lighting factory templates. Do not erect poles without having fixtures installed. If poles are stored outside, all protective wrapping must be removed immediately upon delivery to prevent finish damage. TECHNICAL INFORMATION EPA (FT 2 ) WITH 1.3 GUST (PLEASE SEE WIND MAP ON PAGE 788) CATALOG NUMBER NOM. MOUNT. HT. (FT.) POLE SHAFT SIZE (BASE IN. X TOP IN. X FT.) 80 MPH 90 MPH 100 MPH MAX. WT. BOLT CIRCLE (IN.) BOLT SIZE (IN. X IN. X IN.) APPROX. SHIP WT. (LBS.) RTF 10 5-4X 10 5.4 x 4.1 x 10 19.0 14.6 11.4 150 8 5/8 x 21 x 3 23 RTF 12 5-6X 12 5.6 x 4.1 x 12 16.0 12.1 9.3 150 8.5 5/8 x 21 x 3 28 RTF 14 5-9X 14 5.9 x 4.1 x 14 14.0 10.4 7.9 150 8.5 5/8 x 21 x 3 32 RTF 16 6-1X 16 6.1 x 4.1 x 16 10.0 7.4 5.5 100 8.5 5/8 x 21 x 3 36 RTF 20 6-6X 20 6.6 x 4.1 x 20 8.2 5.8 4.1 100 9.5 5/8 x 21 x 3 45 RTF 20 7-3X 20 7.3 x 4.6 x 20 14.4 11.1 8.9 200 11.5 1 x 36 x 4 62 RTF 25 6-7X 25 6.7 x 4.1 x 25 5.4 3.4 2.0 100 9.5 5/8 x 21 x 3 55 RTF 25 7-3X 25 7.3 x 4.6 x 25 9.6 7.3 5.7 200 11.5 1 x 36 x 4 75 RTF 30 8-4X 30 8.4 x 4.7 x 30 11.2 8.5 6.7 100 11.5 1 x 36 x 4 106 RTF 30 8-5X 30 8.5 x 4.9 x 30 15.6 12.0 9.5 200 11.5 1 x 36 x 4 140 RTF 30 10-5X 30 10.5 x 6.6 x 30 28.7 22.4 17.4 300 14.5 1-1/4 x 42 x 6 202 RTF 35 8-4X 35 8.4 x 4.7 x 35 5.5 3.8 2.7 100 11.5 1 x 36 x 4 125 RTF 35 8-5X 35 8.5 x 4.9 x 35 8.5 6.2 4.7 200 11.5 1 x 36 x 4 161 RTF 35 11-2X 35 11.2 x 6.6 x 35 21.8 16.6 12.5 300 15 1-1/4 x 42 x 6 248 RTF 40 11-7X 40 11.7 x 6.2 x 40 6.4 4.3 2.4 300 15.5 1-1/4 x 42 x 6 165 RTF 40 11-8X 40 11.8 x 6.4 x 40 12.2 8.8 6.0 300 15.5 1-1/4 x 42 x 6 227 RTF 40 12X 40 12.0 x 6.9 x 40 25.8 19.3 14.3 300 15.5 1-1/4 x 42 x 6 317 RTF 45 11-7X 45 11.7 x 6.2 x 45 3.9 2.2 0.6 300 15.5 1-1/4 x 42 x 6 183 RTF 45 11-9X 45 11.9 x 6.6 x 45 15.2 10.9 7.6 300 15.5 1-1/4 x 42 x 6 295 For pole data, see page 607. Intended Use Round Tapered Fiberglass general purpose light pole for up to 35 foot mounting heights. Provides a naturally corrosion- resistant option for area light fixtures and floodlights. Features incorporates "E" type fiberglass and pigmented, UV-inhibiting, thermosetting polyester or epoxy resin to provide maximum strength permanently bonded to the exterior of the fiberglass shaft to ensure maximum support top "PT" poles to prevent intrusion of moisture or environmental contaminants specified color to allow customizable options Intended Use Round Tapered Fiberglass general purpose light pole for up to 35 foot mounting heights. Provides a naturally corrosion- resistant option for area light fixtures and floodlights. Features incorporates "E" type fiberglass and pigmented, UV-inhibiting, thermosetting polyester or epoxy resin to provide maximum strength permanently bonded to the exterior of the fiberglass shaft to ensure maximum support top "PT" poles to prevent intrusion of moisture or environmental contaminants specified color to allow customizable options

Previous Page
Next Page