Product Selection Guide Page 800 Product Selection Guide-11th Edition

PSG11 800 LITHONIA LIGHTING OUTDOOR www.lithonia.com PRODUCT INFORMATION POLES Intended Use Round Straight Aluminum general purpose light pole for up to 35 foot mounting heights. Provides a lighter and naturally corrosion-resistant option for mounting area light fixtures. Features heat treated to a T6 temper to provide maximum strength circumferentially welded to the top and bottom of the base plate and shaft to ensure maximum support. It is also T6 temper reinforced located 18" above the base to allow ease of access to wiring. Grounding provisions located inside (grounding bolt not included) open top "PT" poles to prevent intrusion of moisture or environmental contaminants Polyester powder that meets 5A and 5B classifications of ASTM D3359 and is customizable with a variety of colors Aluminum RSA Round Straight Aluminum 18 ADDITIONAL INFORMATION For ordering information, see page 786. For additional product information, visit www.lithonia.com. TECHNICAL INFORMATION- EPA (FT 2 ) WITH 1.3 GUST (PLEASE SEE WIND MAP ON PAGE 788) NUMBER OF BOLTS CATALOG NUMBER NOM. MOUNT. HT. (FT.) POLE SHAFT SIZE (IN. X FT.) WALL THICK. (IN.) 80 MPH 90 MPH 100 MPH MAX. WT. BOLT CIRCLE (IN.) BOLT SIZE (IN. X IN. X IN.) APPROX. SHIP WT. (LBS.) 4-BOLT BASE RSA 8 4C 8 4 x 8 0.125 11.2 8.6 6.8 125 6.5 - 8.25 3/4 x 18 x 3 22 RSA 10 4C 10 4 x 10 0.125 8.2 6.1 4.7 100 6.5 - 8.25 3/4 x 18 x 3 26 RSA 12 4C 12 4 x 12 0.125 6.0 4.3 3.2 110 6.5 - 8.25 3/4 x 18 x 3 30 RSA 12 4-5C 12 4.5 x 12 0.125 8.1 6.0 4.8 80 7.125 - 8.375 3/4 x 18 x 3 38 RSA 14 4C 14 4 x 14 0.125 4.1 2.8 1.9 75 6.5 - 8.25 3/4 x 18 x 3 35 RSA 14 4-5C 14 4.5 x 14 0.125 5.8 4.2 3.3 60 7.125 - 8.375 3/4 x 18 x 3 42 RSA 14 5C 14 5 x 14 0.125 7.8 6.0 4.7 100 7.5 - 9.5 3/4 x 18 x 3 39 RSA 16 4C 16 4 x 16 0.125 2.8 1.6 1.0 150 6.5 - 8.5 3/4 x 18 x 3 38 RSA 16 4-5C 16 4.5 x 16 0.125 4.2 2.8 2.1 50 7.125 - 8.375 3/4 x 18 x 3 46 RSA 16 4-5G 16 4.5 x 16 0.188 7.5 5.5 4.3 155 7.125 - 8.375 3/4 x 18 x 3 62 RSA 16 5C 16 5 x 16 0.125 5.9 4.4 3.4 175 7.5 - 9.5 3/4 x 18 x 3 46 RSA 16 5E 16 5 x 16 0.156 8.0 6.1 4.8 190 7.5 - 9.5 3/4 x 18 x 3 53 RSA 18 4-5G 18 4.5 x 18 0.188 5.7 4.0 3.1 123 7.125 - 8.375 3/4 x 18 x 3 68 RSA 18 5C 18 5 x 18 0.125 4.3 3.1 2.4 150 7.5 - 9.5 3/4 x 18 x 3 48 RSA 18 5E 18 5 x 18 0.156 6.1 4.6 3.5 175 7.5 - 9.5 3/4 x 18 x 3 58 RSA 18 5G 18 5 x 18 0.188 8.0 6.8 4.7 225 7.5 - 9.5 3/4 x 18 x 3 68 RSA 20 4-5G 20 4.5 x 20 0.188 4.3 2.9 2.1 95 7.125 - 8.375 3/4 x 18 x 3 74 RSA 20 5C 20 5 x 20 0.125 3.0 2.1 1.5 150 7.5 - 9.5 3/4 x 18 x 3 54 RSA 20 5E 20 5 x 20 0.156 4.7 3.4 2.6 150 7.5 - 9.5 3/4 x 18 x 3 68 RSA 20 5G 20 5.x 20 0.188 6.4 4.8 3.6 150 7.5 - 9.5 3/4 x 18 x 3 82 RSA 20 6E 20 6.x 20 0.156 9.3 7.1 5.5 175 8.75 - 10.25 3/4 x 30 x 3 95 RSA 25 4-5G 25 4.5 x 25 0.188 1.3 - - 100 7.125 - 8.375 3/4 x 18 x 3 89 RSA 25 6E 25 6 x 25 0.156 5.2 3.8 2.8 150 8.75 - 10.25 3/4 x 30 x 3 108 RSA 25 6G 25 6.x 25 0.188 7.1 5.3 4.0 150 8.75 - 10.25 3/4 x 30 x 3 128 RSA 30 6G 30 6 x 30 0.188 3.5 2.4 1.6 200 8.75 - 10.25 3/4 x 30 x 3 146 3-BOLT BASE 3RSA 8 3C 8 3 x 8 0.125 5.8 4.3 3.3 75 5.5 - 7 3/4 x 18 x 3 22 3RSA 10 3C 10 3 x 10 0.125 4.0 2.9 2.1 75 5.5 - 7 3/4 x 18 x 3 26 3RSA 10 4C 10 4 x 10 0.125 8.2 6.1 4.7 75 6.3125 - 7.375 3/4 x 18 x 3 26 3RSA 12 3C 12 3 x 12 0.125 2.7 1.8 1.2 75 5.5 - 7 3/4 x 18 x 3 30 3RSA 12 4C 12 4 x 12 0.125 5.8 4.2 3.1 150 6.3125 - 7.375 3/4 x 18 x 3 30 3RSA 12 5C 12 5 x 12 0.125 10.3 8 6.3 150 7.375 - 8.5 3/4 x 18 x 3 36 3RSA 14 3C 14 14 x 3 0.125 1.7 1.0 0 75 5.5 - 7 3/4 x 18 x 3 35 3RSA 14 4C 14 14 x 4 0.125 4.1 2.8 1.9 150 6.3125 - 7.375 3/4 x 18 x 3 35 3RSA 14 5C 14 14 x 5 0.125 7.9 6.0 4.7 150 7.375 - 8.5 3/4 x 18 x 3 39 3RSA 16 4C 16 4 x 16 0.125 2.8 1.6 1.0 150 6.3125 - 7.375 3/4 x 18 x 3 38 3RSA 16 5E 16 5 x 16 0.156 8.0 6.1 4.8 150 7.375 - 8.5 3/4 x 18 x 3 53 3RSA 18 5C 18 5 x 18 0.125 4.3 3.1 2.4 150 7.375 - 8.5 3/4 x 18 x 3 48 3RSA 20 5C 20 5 x 20 0.125 2.9 2.0 1.4 150 7.375 - 8.5 3/4 x 18 x 3 54 3RSA 20 5E 20 5 x 20 0.156 4.6 3.3 2.5 150 7.375 - 8.5 3/4 x 18 x 3 68 INSTALLATION NOTES: Factory-supplied templates must be used when setting anchor bolts. Lithonia Lighting will not accept claim for incorrect anchorage placement due to failure to use Lithonia Lighting factory templates. Do not erect poles without having fixtures installed. If poles are stored outside, all protective wrapping must be removed immediately upon delivery to prevent finish damage. C A C A Notes hole is located on opposite side of drilling. For special drillings, consult factory. POLE DATA NUMBER OF BOLTS SHAFT BASE SIZE BOLT CIRCLE A BOLT PROJECTION B BASE SQUARE C TEMPLATE DESCRIPTION ANCHOR BOLT DESCRIPTION 4-BOLT BASE 4" 6.5" - 8.25" 3.25" 8.75" ABTEMPLATE PJ50057 AB18-0 4.5" 7" - 8.5" 3.25" 8.5" ABTEMPLATE PJ50040 AB18-0 5" 7.5" - 9.5" 3.25" 9.25" ABTEMPLATE PJ50058 AB18-0 6" 8.75" - 10.25" 3.50" 10.25" ABTEMPLATE PJ50059 AB30-0 3-BOLT BASE 3" 5.5" - 7" 3.25" 7.5" ABTEMPLATE PJ50125 AB18-0 4" 6.3125" - 7.375" 3.25" 8.875" ABTEMPLATE PJ50126 AB18-0 5" 7.375" - 8.5" 3.25" 10.25" ABTEMPLATE PJ50127 AB18-0 B

Previous Page
Next Page