Product Selection Guide Page 799 Product Selection Guide-11th Edition

PRODUCT INFORMATION Aluminum Intended Use Square Straight Cruciform Aluminum light pole for up to 30 foot mounting heights. Provides some architectural interest for mounting area light fixtures and floodlights. Features circumferentially welded to the top and bottom of the base plate and shaft to ensure maximum support. It is also T6 temper reinforced of 2" x 4", 18" above the base (12" above base on 4" poles) to allow ease of access to wiring and grounding provisions located inside (grounding bolt not included) open top "PT" poles to prevent intrusion of moisture or environmental contaminants Polyester powder that meets 5A and 5B classifications of ASTM D3359 and is customizable with a variety of colors SSCA Square Straight Aluminum ADDITIONAL INFORMATION For ordering information, see page 786. For additional product information, visit www.lithonia.com. TECHNICAL INFORMATION- EPA (FT 2 ) WITH 1.3 GUST (PLEASE SEE WIND MAP ON PAGE 788) CATALOG NUMBER NOM. MOUNT. HT. (FT.) POLE SHAFT SIZE (IN. X FT.) WALL THICK. (IN.) 80 MPH 90 MPH 100 MPH MAX. WT. (IN. X IN. X IN.) APPROX. BOLT CIRCLE (IN.) BOLT SIZE SHIP WT. (LBS.) SSCA 8 4G 8 4 x 8 0.188 30.2 23.5 18.6 350 8.5 - 9.625 3/4 x 18 x 3 45 SSCA 10 4G 10 4 x 10 0.188 23.5 18 14.1 260 8.5 - 9.625 3/4 x 18 x 3 50 SSCA 12 4G 12 4 x 12 0.188 18.4 13.9 10.7 260 8.5 - 9.625 3/4 x 18 x 3 56 SSCA 15 4G 15 4 x 15 0.188 10.6 7.7 5.6 200 8.5 - 9.625 3/4 x 18 x 3 67 SSCA 18 4G 18 4 x 18 0.188 7.2 4.9 3.2 200 8.5 - 9.625 3/4 x 18 x 3 77 SSCA 18 6G 18 6 x 18 0.188 21.7 15.9 11.7 260 12 - 13 1 x 36 x 4 139 SSCA 20 4G 20 4 x 20 0.188 5.8 3.6 2 100 8.5 - 9.625 3/4 x 18 x 3 84 SSCA 20 6G 20 6 x 20 0.188 18.3 13 9.2 150 12 - 13 1 x 36 x 4 149 SSCA 25 6G 25 6 x 25 0.188 11 6.8 3.7 150 12 - 13 1 x 36 x 4 175 SSCA 30 6G 30 6 x 30 0.188 4.5 1.4 - 260 12 - 13 1 x 36 x 4 201 INSTALLATION NOTES: Factory-supplied templates must be used when setting anchor bolts. Lithonia Lighting will not accept claim for incorrect anchorage placement due to failure to use Lithonia Lighting factory templates. Do not erect poles without having fixtures installed. If poles are stored outside, all protective wrapping must be removed immediately upon delivery to prevent finish damage. POLE DATA SHAFT BASE SIZE BOLT CIRCLE A BOLT PROJECTION B BASE SQUARE C TEMPLATE DESCRIPTION ANCHOR BOLT DESCRIPTION 4" 8.5" - 9.625" 3.125" 9.938" ABTEMPLATE PJ50131 AB18-0 6" 12" - 13" 4" 12.75" ABTEMPLATE PJ50132 AB36-0 A C Notes B 799 PSG11 LITHONIA LIGHTING OUTDOOR www.lithonia.com POLES

Previous Page
Next Page