Product Selection Guide Page 798 Product Selection Guide-11th Edition

PRODUCT INFORMATION Intended Use Square Straight Aluminum general purpose light pole for up to 35 foot mounting heights. Provides a lighter and naturally corrosion-resistant option for mounting area light fixtures and floodlights. Features tubing that is heat treated to a T6 temper to provide maximum strength circumferentially welded to the top and bottom of the base plate and shaft to ensure maximum support. It is also T6 temper reinforced 2" x 4" and located 18" up from pole base to allow ease of access to wiring. Grounding provisions located inside (grounding bolt not included) top "PT" poles to prevent intrusion of moisture or environmental contaminants Polyester powder that meets 5A and 5B classifications of ASTM D3359 and is customizable with a variety of colors Aluminum SSA Square Straight Aluminum ADDITIONAL INFORMATION For ordering information, see page 786. For additional product information, visit www.lithonia.com. TECHNICAL INFORMATION - EPA (FT 2 ) WITH 1.3 GUST (PLEASE SEE WIND MAP ON PAGE 788) CATALOG NUMBER NOM. MOUNT. HT. (FT.) POLE SHAFT SIZE (IN. X FT.) WALL THICK. (IN.) 80 MPH 90 MPH 100 MPH MAX. WT. BOLT CIRCLE (IN.) BOLT SIZE (IN. X IN. X IN.) APPROX. SHIP WT. (LBS.) SSA 8 4C 8 4 x 8 0.125 16.5 12.6 9.9 300 8.5 - 9.625 3/4 x 18 x 3 32 SSA 10 4C 10 4 x 10 0.125 11.5 8.6 6.5 230 8.5 - 9.625 3/4 x 18 x 3 37 SSA 12 4C 12 4 x 12 0.125 12.4 9.2 6.9 160 8.5 - 9.625 3/4 x 18 x 3 40 SSA 14 4C 14 4 x 14 0.125 9.3 6.7 4.8 120 8.5 - 9.625 3/4 x 18 x 3 50 SSA 15 4C 15 4 x 15 0.125 8.0 5.6 3.9 100 8.5 - 9.625 3/4 x 18 x 3 52 SSA 16 4C 16 4 x 16 0.125 6.9 4.7 3.1 90 8.5 - 9.625 3/4 x 18 x 3 54 SSA 16 4G 16 4 x 16 0.188 11.8 8.5 6.2 130 8.5 - 9.625 3/4 x 30 x 3 74 SSA 16 5G 16 5 x 16 0.188 15.0 11.1 7.5 280 10.5 - 11.5 3/4 x 30 x 3 83 SSA 18 4C 18 4 x 18 0.125 4.9 3.0 1.7 70 8.5 - 9.625 3/4 x 18 x 3 57 SSA 18 4G 18 4 x 18 0.188 9.2 6.4 4.4 100 8.5 - 9.625 3/4 x 30 x 3 80 SSA 18 5G 18 5 x 18 0.188 16.8 12.2 8.9 230 10.5 - 11.5 3/4 x 30 x 3 91 SSA 20 4C 20 4 x 20 0.125 3.3 1.7 0.5 40 8.5 - 9.625 3/4 x 18 x 3 62 SSA 20 4G 20 4 x 20 0.188 7.0 4.6 2.9 80 8.5 - 9.625 3/4 x 30 x 3 85 SSA 20 5G 20 5 x 20 0.188 13.6 9.5 6.6 180 10.5 - 11.5 3/4 x 30 x 3 107 SSA 20 6G 20 6 x 20 0.188 22.0 15.9 11.6 230 12 - 13 1 x 36 x 4 155 SSA 20 6J 20 6 x 20 0.250 30.4 22.6 17.0 300 12 - 13 1 x 36 x 4 202 SSA 25 5G 25 5 x 25 0.188 7.2 4.2 2.0 110 10.5 - 11.5 3/4 x 30 x 3 130 SSA 25 6G 25 6 x 25 0.188 13.2 8.6 5.4 180 12 - 13 1 x 36 x 4 180 SSA 25 6J 25 6 x 25 0.250 19.7 13.8 9.5 250 12 - 13 1 x 36 x 4 224 SSA 30 6G 30 6 x 30 0.188 7.0 3.4 0.8 130 12 - 13 1 x 36 x 4 210 SSA 30 6J 30 6 x 30 0.250 12.2 7.5 4.1 170 12 - 13 1 x 36 x 4 258 SSA 32 6J 32 6 x 32 0.250 9.7 5.4 2.3 160 12 - 13 1 x 36 x 4 272 SSA 35 6J 35 6 x 35 0.250 6.4 2.6 - 200 12 - 13 1 x 36 x 4 294 SSA 35 7J 35 6.75 x 35 0.250 7.6 3.1 - 150 14.625 1 x 36 x 4 290 POLE DATA SHAFT BASE SIZE BOLT CIRCLE A BOLT PROJECTION B BASE SQUARE C TEMPLATE DESCRIPTION ANCHOR BOLT DESCRIPTION 4"C 8.5" - 9.625" 3.125" 9.938" ABTEMPLATE PJ50045 AB18-0 4"G 8.5" - 9.625" 3.125" 9.938" ABTEMPLATE PJ50045 AB30-0 5" 10.5" - 11.5" 3.25" 11.563" ABTEMPLATE PJ50046 AB30-0 6" 12" - 13" 4" 12.25" ABTEMPLATE PJ50044 AB36-0 7" 14.625" 4.125" 15" ABTEMPLATE PJ50130 AB36-0 Nut cover disc Tapped 3/8 for ground connector 18" A C B Notes incorrect anchorage placement due to failure to use Lithonia Lighting factory templates. Do not erect poles without having fixtures installed. If poles are stored outside, all protective wrapping must be removed immediately upon delivery to prevent finish damage. PSG11 798 LITHONIA LIGHTING OUTDOOR www.lithonia.com POLES

Previous Page
Next Page