Product Selection Guide Page 795 Product Selection Guide-11th Edition

795 PSG11 LITHONIA LIGHTING OUTDOOR www.lithonia.com PRODUCT INFORMATION STSH Square Tapered Steel, Hinged POLES Steel ADDITIONAL INFORMATION For ordering information, see page 786. For additional product information, visit www.lithonia.com. TECHNICAL INFORMATION - EPA (FT 2 ) WITH 1.3 GUST (PLEASE SEE WIND MAP ON PAGE 788) CATALOG NUMBER NOM. MOUNT. HT. (FT.) POLE SHAFT SIZE (BASE IN. X TOP IN. X FT.) WALL THICK. (IN.) GAUGE 80 MPH MAX. WT. 90 MPH MAX. WT. 100 MPH MAX. WT. BOLT CIRCLE (IN.) BOLT SIZE (IN. X IN. X IN.) APPROX. SHIP WT. (LBS) STSH 20 4F 20 4 x 4 x 20 0.188 7 11.6 217 8.5 217 6.2 217 8.5 - 10 3/4 x 18 x 3 300 STSH 25 4F 25 4 x 4 x 25 0.188 7 7.1 160 4.8 160 3.1 160 8.5 - 10 3/4 x 18 x 3 370 STSH 25 6-4B 25 6.41 x 3.63 x 25 0.125 11 18.0 254 13.0 254 9.3 254 12.5 1 x 36 x 4 355 STSH 30 4F 30 4 x 4 x 30 0.188 7 4.0 120 2.1 120 0.8 120 8.5 - 10 3/4 x 18 x 3 435 STSH 30 6-4B 30 6.41 x 3.08 x 30 0.125 11 12.5 230 8.3 230 5.1 230 12.5 1 x 36 x 4 440 STSH 35 7-1B 35 7.18 x 2.88 x 35 0.125 11 7.1 160 3.2 160 - 13.5 1 x 36 x 4 540 STSH 35 7-1F 35 7.13 x 2.87 x 35 0.188 7 22.0 155 16.9 155 12.1 155 13.5 1 x 36 x 4 700 STSH 39 7-1F 39 7.13 x 2.87 x 39 0.188 7 19.5 110 13.5 110 9.2 110 13.5 1 x 36 x 4 740 POLE DATA SHAFT BASE SIZE BOLT CIRCLE A BOLT PROJECTION B BASE SQUARE C TEMPLATE DESCRIPTION ANCHOR BOLT DESCRIPTION 4.0" F 8.5" - 10" 3.50" - 4.25" 9.75" ABTEMPLATE PJ50091 AB18-0 6.4" B 12.5" 3.75" - 4.50" 11.875" ABTEMPLATE PJ50092 AB36-0 7.1" B 13.5" 3.50" - 4.25" 12.625" ABTEMPLATE PJ50094 AB36-0 7.1" F 13.5" 4.00" - 4.75" 12.625" ABTEMPLATE PJ50093 AB36-0 Removable Winch detail (accessory) B WINCH ORDERING WINCH NOMENCLATURE SHAFT SIZE STSHWCH 4F 4F STSHWCH 6-4B 6-4B STSHWCH 7-1B 7-1B STSHWCH 7-1F 7-1F INSTALLATION NOTES: Factory-supplied templates must be used when setting anchor bolts. Lithonia Lighting will not accept claim for incorrect anchorage placement due to failure to use Lithonia Lighting factory templates. Do not erect poles without having fixtures installed. If poles are stored outside, all protective wrapping must be removed immediately upon delivery to prevent finish damage. Intended Use Square Tapered Steel Hinged light pole with upsweep mast 20 to 39 foot mounting heights. Best used where maintenance access is limited. Features tubing with a minimum yield of 55,000 psi in 11-gauge or 7-gauge protection standards and can be altered to match existing foundations 4" shafts and oval shaped 4" x 6.5" for all other shafts to allow ease of access to wiring and grounding provisions located inside (grounding bolt not included) open top "PT" poles to prevent intrusion of moisture or environmental contaminants Polyester powder that meets 5A and 5B classifications of ASTM D3359 and is customizable with a variety of colors or galvanized External hinge detail Hinge pin Shroud Wiring protection Bottom Top assembly A Bolt slots C (Only 4" poles have slotted bolt holes) Notes

Previous Page
Next Page