Product Selection Guide Page 792 Product Selection Guide-11th Edition

PSG11 792 LITHONIA LIGHTING OUTDOOR www.lithonia.com PRODUCT INFORMATION POLES Intended Use Square Tapered Steel general purpose light pole for up to 50 foot mounting heights. Provides extended mounting heights and additional strength for mounting area light fixtures and floodlights. Features minimum yield of 55,000 psi and constant taper of .11in/ft standards and can be altered to match existing foundations of 3" x 5" for shafts less than 6.375" square and oval shaped 4" x 6.5", 18" above the base to allow ease of access to wiring and grounding provisions located inside (grounding bolt not included) top "PT" poles to prevent intrusion of moisture or environmental contaminants Polyester powder that meets 5A and 5B classifications of ASTM D3359 and is customizable with a variety of colors or galvanized Steel STS Square Tapered Steel ADDITIONAL INFORMATION For ordering information, see page 786. For additional product information, visit www.lithonia.com. TECHNICAL INFORMATION - EPA (FT 2 ) WITH 1.3 GUST (PLEASE SEE WIND MAP ON PAGE 788) CATALOG NUMBER NOM. MOUNT. HT. (FT.) POLE SHAFT SIZE (BASE IN. X TOP IN. X FT.) WALL THICK. (IN.) GAUGE 80 MPH MAX. WT. 90 MPH MAX. WT. 100 MPH MAX. WT. BOLT CIRCLE (IN.) BOLT SIZE (IN. X IN. X IN.) APPROX SHIP WT. (LBS.) STS 20 5-2B 20 5.25 x 3.05 x 20 0.125 11 18.0 452 13.8 345 10.7 268 10.75 1 x 36 x 4 155 STS 20 5-5F 20 5.50 x 3.30 x 20 0.188 7 30.5 764 24.0 602 19.0 477 11 1 x 36 x 4 235 STS 25 6-0B 25 6.00 x 3.25 x 25 0.125 11 16.8 422 12.6 315 9.5 238 12 1 x 36 x 4 205 STS 25 6-4F 25 6.41 x 3.66 x 25 0.188 7 28.5 713 22.5 563 18.2 455 12.5 1 x 36 x 4 310 STS 30 6-4B 30 6.41 x 3.11 x 30 0.125 11 13.6 340 9.8 245 7.0 175 12.5 1 x 36 x 4 260 STS 30 6-4F 30 6.41 x 3.11 x 30 0.188 7 23.6 590 17.9 448 13.7 343 12.5 1 x 36 x 4 375 STS 35 6-8B 35 6.81 x 2.96 x 35 0.125 11 10.7 269 7.3 184 4.8 120 13 1 x 36 x 4 305 STS 35 7-1F 35 7.13 x 3.28 x 35 0.188 7 23.4 585 17.4 435 13.0 325 13.5 1 x 36 x 4 475 STS 39 7-1B 39 7.18 x 2.92 x 39 0.125 11 8.6 215 5.4 135 3.0 75 13.5 1 x 36 x 4 345 STS 39 7-1F 39 7.13 x 2.87 x 39 0.188 7 19.3 483 14.2 355 10.4 260 13.5 1 x 36 x 4 500 STS 45 7-8F 45 7.88 x 2.93 x 45 0.188 7 16.0 400 11.1 278 7.4 187 14.5 1 x 36 x 4 620 STS 45 8-7F 45 8.75 x 3.80 x 45 0.188 7 23.5 588 16.6 415 11.4 287 15.75 1-1/4 x 42 x 6 730 STS 50 8-8F 50 8.81 x 3.31 x 50 0.188 7 19.4 485 13.2 332 8.7 218 16 1-1/4 x 42 x 6 780 18 A C B Notes side drilling. POLE DATA SHAFT BASE SIZE BOLT CIRCLE A BOLT PROJECTION B BASE SQUARE C TEMPLATE DESCRIPTION ANCHOR BOLT DESCRIPTION 5.2" B 10.75" 3.50"-4.25" 10.75" ABTEMPLATE PJ50095 AB36-0 5.5" F 11" 3.75"-4.50" 11" ABTEMPLATE PJ50096 AB36-0 6.0" B 12" 3.50"-4.25" 11.5" ABTEMPLATE PJ50097 AB36-0 6.4" F 12.5" 4.00"-4.75" 11.875" ABTEMPLATE PJ50098 AB36-0 6.4" B 12.5" 3.50"-4.25" 11.875" ABTEMPLATE PJ50099 AB36-0 6.8" B 13" 3.50"-4.25" 12.25" ABTEMPLATE PJ50101 AB36-0 7.1" F 13.5" 4.25"-5.00" 12.625" ABTEMPLATE PJ50102 AB36-0 7.1" B 13.5" 3.50"-4.25" 12.625" ABTEMPLATE PJ50103 AB36-0 7.8" F 14.5" 4.00"-4.75" 13.375" ABTEMPLATE PJ50105 AB36-0 8.7" F 15.75" 4.75"-5.50" 14.25" ABTEMPLATE PJ50106 AB42-0 8.8" F 16" 4.50"-5.25" 15.5" ABTEMPLATE PJ50107 AB42-0 INSTALLATION NOTES: Factory-supplied templates must be used when setting anchor bolts. Lithonia Lighting will not accept claim for incorrect anchorage placement due to failure to use Lithonia Lighting factory templates. Do not erect poles without having fixtures installed. If poles are stored outside, all protective wrapping must be removed immediately upon delivery to prevent finish damage.

Previous Page
Next Page