Product Selection Guide Page 790 Product Selection Guide-11th Edition

PSG11 790 LITHONIA LIGHTING OUTDOOR www.lithonia.com PRODUCT INFORMATION POLES Intended Use Square Straight Steel general purpose light pole for up to 39 foot mounting heights. Provides an inexpensive yet robust option for mounting area light fixtures and floodlights. Features tubing with a minimum yield of 55,000 psi (11-gauge) or 50,000 psi (7-gauge) standards and can be altered to match existing foundations of 2.5" x 5" for all shafts to allow ease of access to wiring and grounding provisions located inside (grounding bolt not included) top "PT" poles to prevent intrusion of moisture or environmental contaminants Polyester powder that meets 5A and 5B classifications of ASTM D3359 and is customizable with a variety of colors or galvanized Steel SSS ADDITIONAL INFORMATION For ordering information, see page 786. For additional product information, visit www.lithonia.com. INSTALLATION NOTES: Factory-supplied templates must be used when setting anchor bolts. Lithonia Lighting will not accept claim for incorrect anchorage placement due to failure to use Lithonia Lighting factory templates. Do not erect poles without having fixtures installed. If poles are stored outside, all protective wrapping must be removed immediately upon delivery to prevent finish damage. B Notes POLE DATA SHAFT BASE SIZE BOLT CIRCLE A BOLT PROJECTION B BASE SQUARE C TEMPLATE DESCRIPTION ANCHOR BOLT DESCRIPTION ANCHOR BOLT AND TEMPLATE DESCRIPTION 4"C 8.5" 2.75" - 4.00" 8" ABTEMPLATE PJ50004 AB18-0 ABSSS-4C 4"G 8.5" 2.75" - 4.00" 8" ABTEMPLATE PJ50004 AB30-0 ABSSS-4G 5" 10" - 12" 3.375" - 4.00" 11" ABTEMPLATE PJ50010 AB36-0 ABSSS-5 6" 11" - 13" 3.375" - 4.00" 12.5" ABTEMPLATE PJ50011 AB36-0 NA TECHNICAL INFORMATION - EPA (FT 2 ) WITH 1.3 GUST (PLEASE SEE WIND MAP ON PAGE 788) CATALOG NUMBER NOM. MOUNT. HT. (FT.) POLE SHAFT SIZE (IN. X FT.) WALL THICK. (IN.) GAUGE 80 MPH MAX. WT. 90 MPH MAX. WT. 100 MPH MAX. WT. BOLT CIRCLE (IN.) BOLT SIZE (IN. X IN. X IN.) APPROX. SHIP WT. (LBS.) SSS 10 4C 10 4 x 10 0.125 11 30.6 765 23.8 595 18.9 473 8 - 9 3/4 x 18 x 3 75 SSS 12 4C 12 4 x 12 0.125 11 24.4 610 18.8 470 14.8 370 8 - 9 3/4 x 18 x 3 90 SSS 14 4C 14 4 x 14 0.125 11 19.9 498 15.1 378 11.7 293 8 - 9 3/4 x 18 x 3 100 SSS 16 4C 16 4 x 16 0.125 11 15.9 398 11.8 295 8.9 223 8 - 9 3/4 x 18 x 3 115 SSS 18 4C 18 4 x 18 0.125 11 12.6 315 9.2 230 6.7 168 8 - 9 3/4 x 18 x 3 125 SSS 20 4C 20 4 x 20 0.125 11 9.6 240 6.7 167 4.5 150 8 - 9 3/4 x 18 x 3 140 SSS 20 4G 20 4 x 20 0.188 7 14.0 350 11.0 275 8.0 200 8 - 9 3/4 x 30 x 3 198 SSS 20 5C 20 5 x 20 0.125 11 17.7 443 12.7 343 9.4 235 10 - 12 1 x 36 x 4 185 SSS 20 5G 20 5 x 20 0.188 7 28.1 703 21.4 535 16.2 405 10 - 12 1 x 36 x 4 265 SSS 25 4C 25 4 x 25 0.125 11 4.8 150 2.6 100 1.0 50 8 - 9 3/4 x 18 x 3 170 SSS 25 4G 25 4 x 25 0.188 7 10.8 270 7.7 188 5.4 135 8 - 9 3/4 x 30 x 3 245 SSS 25 5C 25 5 x 25 0.125 11 9.8 245 6.3 157 3.7 150 10 - 12 1 x 36 x 4 225 SSS 25 5G 25 5 x 25 0.188 7 18.5 463 13.3 333 9.5 238 10 - 12 1 x 36 x 4 360 SSS 30 4G 30 4 x 30 0.188 7 6.0 150 4.0 100 2.5 75 8 - 9 3/4 x 30 x 3 295 SSS 30 5C 30 5 x 30 0.125 11 4.7 150 2.0 50 - - 10 - 12 1 x 36 x 4 265 SSS 30 5G 30 5 x 30 0.188 7 10.7 267 6.7 167 3.9 100 10 - 12 1 x 36 x 4 380 SSS 30 6G 30 6 x 30 0.188 7 19.0 475 13.2 330 9.0 225 11 - 13 1 x 36 x 4 520 SSS 35 5G 35 5 x 35 0.188 7 5.9 150 2.5 100 - - 10 - 12 1 x 36 x 4 440 SSS 35 6G 35 6 x 35 0.188 7 12.4 310 7.6 190 4.2 105 11 - 13 1 x 36 x 4 540 SSS 39 6G 39 6 x 39 0.188 7 7.2 180 3.0 75 - - 11 - 13 1 x 36 x 4 605

Previous Page
Next Page