Product Selection Guide Page 77 Product Selection Guide-11th Edition

PRODUCT INFORMATION 77 PSG11 Series Number of lamps Lamp type Shielding Voltage Ballast configuration Ballast WP 1 2 Not included. 17 17W T8 (24") 25 25W T8 (36") 14T5 14W T5 (22") 28T5 28W T5(46") 32 32W T8 (48") 54T5HO 54W T5HO(46") (blank) #12 pattern inverted, .125" thick acrylic, uplight ACF125 Matte white flat acrylic, .125" thick, uplight PCL12125V #12 pattern inverted, .125" thick polycarbonate, uplight MVOLT 347 1 (blank) 1- and/or 2-lamp ballasts per Lithonia Lighting standards 2/1 Two 1-lamp ballasts 2,3 GEB10IS T8 electronic ballast, 10% THD, instant start GEB10PS T5 electronic ballast, 10% THD, programmed start ORDERING INFORMATION Specifications subject to change. Example: WP 2 32 MVOLT GEB10IS Intended Use For applications that require a low profile appearance. Ideal for stairwells, restrooms, patient care, lobbies, or corridors. Features cross-section prismatic pattern Listings UL Listed. cUL Listed or CSA Certified to Canadian Standards-optional. NOM Certified - optional. WP ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com. Notes 1 Available only with CSA option. 2 Must be specified with S2, S4, or BF options. 3 BF option must be specified if separation of up and down light is desired. 4 Requires 2/1 option. 5 For optimal locations, consult factory. Applications requiring mounting flush with both ceiling and wall, require DO option. SURFACE/WALL Wall www.lithonia.com Options S1 Left-mounted on/offpull-switch (all lamps) 5 S2 Left-mounted on/offpull-switch for downlight, remote uplight switching 4,5 S4 Left-mounted four-position pull-switch (front only, rear only, all on, all off) 4,5 BF Internal baffle to divide uplight and downlight 4 SWR Rocker switch, bottom right 5 CO Grounded convenience outlet, installed bottom right (120V only) 5 EL Emergency battery pack MB Matte black RIF1 Radio interference filter (one per fixture) TPS Tamperproof screw DO Downlight only; solid-top metal housing CSA Meets Canadian standards NOM Meets Mexican standards CONFIGURATIONS SERIES NUMBER OF LAMPS LAMP TYPE LENGTH IN. (CM) WIDTH IN. (CM) HEIGHT IN. (CM) WP 1, 2 17, 14T5 24-1/2 (62.2) 7-3/8 (18.7) 3-1/4 (8.3) WP 1, 2 25, 21T5 36-1/2 (92.7) 7-3/8 (18.7) 3-1/4 (8.3) WP 1, 2 32, 28T5, 54T5HO 48-1/2 (123.2) 7-3/8 (18.7) 3-1/4 (8.3) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. Certain airborne contaminants can diminish integrity of acrylic and polycarbonate. Refer to the Acrylic & Polycarbonate Environmental Compatibility tables on pages 1116-1117 for suitable uses. LITHONIA LIGHTING COMMERCIAL INDOOR

Previous Page
Next Page