Product Selection Guide Page 733 Product Selection Guide-11th Edition

733 PSG11 LITHONIA LIGHTING OUTDOOR www.lithonia.com PRODUCT INFORMATION Intended Use For building-and wall-mounted applications. Features up to 75% in energy hours and eliminate the frequent lamp changes associated with traditional sources the need for a bulky back box while still providing the benefits of emergency illumination bubble level for easy positioning while support rods hold the weight of the luminaire so wiring can be done quickly and easily positioned to provide upward illumination on a building's faade and save more energy while the area is unoccupied Listings UL Listed suitable for wet locations (damp location listed in lens-up orientation). CSA Certified (see Options). IP65 rated. DesignLights Consortium qualified product. MRW LED Architectural Wall Sconce WALL MOUNTED Architectural H W D For 3/4NPT side- entry conduit W D H ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com. Notes 1 MVOLT driver operates on any line voltage from 120-277V (50/60 Hz). Specify 120, 208, 240 or 277 options only when ordering with photocell (PE option) or fusing (SF, DF options). 2 May also be ordered separately as an accessory. Ex: WSBBW DDBXD U. Must specify finish. 3 Must be ordered with fixture; cannot be field installed. 4 Not available with MVOLT option. Button photocell (PE) can be ordered with a dedicated voltage option. Single fuse (SF) requires 120, 277 or 347 voltage option. Double fuse (DF) requires 208, 240 or 480 voltage option. 5 Not available with 480V option. Not available with motion/ambient light sensor (PIR). 6 Integral battery pack is rated for -20 to 60C operating temperature. ELCW warranty is 3 year period. Not available with 347V or 480V. 7 Specifies the Sensor Switch SFD-7-ODP control (photocell included); see Motion Sensor Guide for details. Includes ambient light sensor. Not available with PEoption (button type photocell). Dimming driver standard. Not available with WLU, VG or WG. Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. Example: MRW LED 2 10A700/40K SR3 MVOLT DDBTXD Series Light engines Performance package Distribution Voltage Mounting MRW LED 1 One engine (10 LEDs) 2 Two engines (20 LEDs) 700 mA options: 10A700/30K 3000K 10A700/40K 4000K 10A700/50K 5000K SR2 Type II SR3 Type III SR4 Type IV MVOLT 1 120 1 208 1 240 1 277 1 347 1 480 Shipped included (blank) Surface mount Shipped separately 2 BBW Surface-mounted back box UT5 Uptilt 5 degrees Options 3 Finish Shipped installed PE Photoelectric cell, button type 4,5 SF Single fuse (120, 277, 347V) 4 DF Double fuse (208, 240, 480V) 4 DMG 0-10V dimming driver (no controls) ELCW Emergency battery backup 6 WLU Wet location door for up orientation PIR Motion/ambient light sensor 7 Shipped separately VG Vandal guard WG Wire guard DDBXD Dark bronze DBLXD Black DNAXD Natural aluminum DWHXD White DSSXD Sandstone DDBTXD Textured dark bronze DBLBXD Textured black DNATXD Textured natural aluminum DWHGXD Textured white DSSTXD Textured sandstone ORDERING INFORMATION Specifications subject to change. SPECIFICATIONS HEIGHT WIDTH DEPTH WEIGHT 7-1/4" (18.4 cm) 18" (45.7 cm) 9" (22.8 cm) 18 lbs (8.2 kg) OPTIONAL BACK BOX (BBW) HEIGHT WIDTH DEPTH 4" (10.2 cm) 5-1/2" (14.0 cm) 1-1/2" (3.8 cm)

Previous Page
Next Page