Product Selection Guide Page 726 Product Selection Guide-11th Edition

PSG11 726 LITHONIA LIGHTING OUTDOOR www.lithonia.com PRODUCT INFORMATION WALL MOUNTED Intended Use For building- and wall-mounted applications. Features and life allows for one-person installation Listings CSA Listed to U.S. and Canadian safety standards suitable for wet locations in the down orientation. NOM Certified. IP65 rated. 175W and below - listed to 40 C ambient. CFL-2/42 and below and 250W and above - listed to 30 C ambient. Emergency options in all wattages, 200W, and 70W and 57W CFL- listed to 25 C ambient. TWF General Purpose Notes 1 Available up to 150S, 200M, and 70TRT compact fluorescent. 2 Available in 250-400W HPS and MH. 3 Must be ordered with SCWA. 4 Must be ordered with lamp included (LPI). 5 Consult factory for availability in Canada. 6 Optional multi-tap ballast (120, 208, 240, 277V; 120, 277, 347V in Canada--ships as 120/347 in Canada). 7 Optional multi-volt electronic ballast (for compact fluorescent only) capable of operating on any line voltage from 120V-277V. 8 Consult factory for availability. 9 SCWA: Not available with HPS and 70M or 100M; HEB: Only available with 70M or 100M. 10 Cannot be ordered with any other emergency option. 11 Available for compact fluorescent only; not available with 2/32TRT, 2/42TRT, 57TRT, or 70TRT. 12 Available for compact fluorescent only; not available with 57TRT or 70TRT. 13 Available for compact fluorescent only. 14 Pilot light/test switch mounting plate included. 15 Available for compact fluorescent only; not available with 2/42TRT, 57TRT, or 70TRT. 16 Must be ordered with fixture; cannot be field installed. 17 Maximum wattage 100M and 70S. Must specify 120V or 277V. 18 Must specify voltage. 19 Not available with SF, DF or GMF. 20 Consult factory for maximum HID wattage available with this option. 21 Available with the TWF1 only. 22 Available with the TWF2 only. 23 Available for compact fluorescent only; available with 2/26DTT, 2/32TRT, and 2/42TRT. 24 May be ordered as an accessory. TWF1 TWF2 Depth: 9-5/8 (24.4) 12-3/8 (31.4) Width: 16 (40.6) 18 (45.7) Height: 10-1/8 (25.7) 11-1/2 (29.2) Max. weight: 24 lbs (10.8 kg) 39 lbs (17.6 kg) D W H Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. Example: TWF1 100M TB LPI Series Lamp type Voltage Ballast Options TWF1 1 TWF2 2 High pressure sodium 70S 100S 150S 250S 400S Metal halide 70M 100M 150M 175M 200M 3 250M 320M 3 350M 3 400M Metal halide ceramic 4 700MHC 100MHC 150MHC Compact fluorescent 26DTT 2/26DTT 32TRT 2/32TRT 42TRT 2/42TRT 57TRT 70TRT 120 208 5 240 5 277 480 5 347 TB 6 MVOLT 7 (blank) Magnetic ballast CWI Constant wattage isolated ballast 8 SCWA Super CWA ballast 9 HEB Electronic ballast 9,21 Shipped installed SF Single fuse, 120V, 277V, 347V DF Double fuse, 208V, 240V, 480V GMF Internal slow-blow fusing (not available with MVOLT; CFL only) ELDW Bodine emergency battery pack 10, 11 ELDWC Cold-weather emergency battery pack 10, 12 ELDWR Fixture wired ready for Bodine B30 battery pack 10, 13, 14 ELDWRPS Fixture wired ready for PS1400 or PSDL battery pack 10, 14, 15 EC Emergency circuit 10, 16 Options (continued) Finish Lamped QRS Quartz restrike system 10, 16 QRSTD QRS time delay 10, 16 ELD LED emergency single 10, 17, 18 2ELED LED emergency double 10, 17, 18 DC12 Emergency circuit 12V; 35W lamp included 10, 19 2DC12 Emergency circuit 12V; two 35W lamps lamps included 10, 19 DC2012 Emergency circuit 12V; 20W lamp included 10, 19 2DC2012 Emergency circuit 12V; two 20W lamps included 10, 19, 20 PE Photoelectric cell - button type (not available TB, MVOLT or 480V) 16, 18 PE NEMA twist-lock receptacle only (no photocell) 16, 22 CSA Meets Canadian standards NOM Meets Mexican standards (consult factory) INTL Available for MH probe start shipping outside the U.S. 2/1 Two 1-lamp ballasts 23 DS Dual switching 23 Shipped separately 24 TWF1BBW Surface mounted back box TWF1WG Wire guard TWF1VG Vandal guard TWF2BBW Surface mounted back box TWF2VG Vandal guard TWF2VG Wire guard PE1 NEMA twist-lock PE (120, 208, 240V) PE3 NEMA twist-lock PE (347V) PE4 NEMA twist-lock PE (480V) PE7 NEMA twist-lock PE (277V) (blank) Dark bronze textured (std.) DNAT Natural aluminum-textured DWHG White-textured DBLB Black-textured CRT Non-stick protective coating (black) LPI Lamp included L/LP Less lamp ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com. ORDERING INFORMATION Specifications subject to change.

Previous Page
Next Page