Product Selection Guide Page 725 Product Selection Guide-11th Edition

725 PSG11 LITHONIA LIGHTING OUTDOOR PRODUCT INFORMATION Intended Use The energy savings, long life and easy-to-install design of the D-Series Wall Size 2 make it the smart choice for building- mounted doorway and pathway illumination for nearly any facility. Features up to 76% in energy hours and eliminate the frequent lamp changes associated with traditional sources and allow for maximum luminaire spacing dim and save more energy while the area is unoccupied allows for one-person installation Listings CSA Certified to U.S. and Canadian standards. Rated for -40C minimum ambient. DesignLights Consortium qualified product. D-SERIES WALL SIZE 2 LED Wall Luminaire WALL MOUNTED Architectural Example: DSXW2 LED 30C 700 40K T3M MVOLT DDBTXD ADDITIONAL INFORMATION For additional product information, visit Series Performance package Distribution Voltage Mounting DSXW2 LED LEDs 20C 20 LEDs (two engines) 30C 30 LEDs (three engines) Drive current 350 350mA 530 530mA 700 700 mA 1000 1000 mA (1 A) Color temperature 30K 3000K 40K 4000K 50K 5000K T2S Type II short T2M Type II medium T3S Type III short T3M Type III medium T4M Type IV medium TFTM Forward throw medium MVOLT 1 120 1 208 1 240 1 277 1 347 2 480 2 Shipped included (blank) Surface mounting bracket Shipped seperately 3 BBW Surface-mounted back box (for conduit entry) Control options Other options Accessories: Order Separately Shipped installed PE Photoelectric cell, button type 4 PER NEMA twist-lock receptacle only (no controls) DMG 0-10V dimming driver(no controls) DCR Dimmable and controllable via ROAM (no controls) 5 PIRH 180 motion/ambient light sensor, 15-30' mtg ht 6 Shipped installed SF Single fuse (120, 277, 347V) 7 DF Double fuse (208, 240V, 480V) 7 HS House-side shield 3 SPD Separate surge protection Shipped separately BSW Bird-deterrent spikes 3 WG Wire guard 3 VG Vandal guard 3 DSXWHS U House-side shield (one per light engine) DSXWBSW U Bird-deterrent spikes DSXW1WG U Wire guard accessory DSXW1VG U Vandal guard accessory ORDERING INFORMATION Specifications subject to change. Notes 1 MVOLT driver operates on any line voltage from 120-277V (50/60 Hz). Specify 120, 208, 240 or 277 options only when ordering with fusing (SF, DF options), or photocontrol (PE option). 2 Available with 30 LED/700mA options only (DSXW2 LED 30C 700). 3 Also available as a separate accessory; see Accessories information. 4 Photocontrol (PE) requires 120,208, 240 or 277 voltage option. Not available with motion/ambient light sensors (PIR or PIRH). 5 Specifies a ROAM enabled luminaire with 0-10V dimming capability; PER option required. Not available with 347 or 480V. Additional hardware and services required for ROAM deploy- ment; must be purchased separately. Call 1-800-442-6745 or email: 6 Specifies the Sensor Switch SBR-6-ODP control; see Motion Sensor Guide for details. Includes ambient light sensor. Not available with PEoption (button type photocell). Dimming driver standard. 7 Single fuse (SF) requires 120, 277 or 347 voltage option. Double fuse (DF) requires 208, 240 or 480 voltage option. 8 Requires luminaire to be specified with PER option. Ordered and shipped as a separate line item. SPECIFICATIONS LUMINAIRE WIDTH DEPTH HEIGHT WEIGHT 18-1/2" (47.0 cm) 10" (25.4 cm) 7-5/8" (19.4 cm) 21 lbs (9.5 kg) SPECIFICATIONS BACK BOX (BBW) WIDTH DEPTH WEIGHT 5-1/2" (14.0 cm) 1-1/2" (3.8 cm) 4" (10.2 cm) 7-5/8 (19.4) 5-1/2 1-1/2 D For 3/4 NPT side-entry conduit 5-1/2 (14.0 ) 1-1/2 (3.8 ) 4 (10.2 ) 4 (10.2 ) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

Previous Page
Next Page