Product Selection Guide Page 723 Product Selection Guide-11th Edition

723 PSG11 LITHONIA LIGHTING OUTDOOR PRODUCT INFORMATION Intended Use For walkways, plazas or pedestrian areas. Features minimum of 0.188 wall thickness for increased strength distribution bolts with double leveling nuts to secure bollard module and are located at the bottom of the bollard for easy access Listings UL Listed (standard). CSA Certified (see Options). UL Listed for wet locations. KBS KBE BOLLARDS Architectural KBS KBE CONFIGURATIONS SERIES LAMP TYPE DISTRIBUTION KBE6, KBS6 35S, 50S, 50M, 70S, 70M, I R5, CYA, CYB, CYG, CYF KBE8, KBS8 50S, 70S, 70M, 100S, 100M, 150S, I R5, CYA, CYB, CYG, CYF Notes 1 Specify lamp type and distribution. See Configurations table. 2 120V only. 3 Requires coated lamp. 4 KB-6: 116W/TS, lamp not included. 5 KB-8: 150W max., lamp not included. 6 Consult factory for use in Canada. 7 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V. 8 Cover ships separately. 9 Choose primary fixture finish and stripe color if desired. KBE6 KBE8 KBS6 KBS8 * Also available in 24" (H24), 30" (H30) and 36" (H36). Max. weight: 43.2 lbs (19.6 kg) 42* (106.7) 42* (106.7) 6 (15.2) 8 (20.3) 6 (15.2) 8 (20.3) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. Standard flared cone Optional cylindrical reflector Example: KBS6 70M R5 TB LPI Series Lamp type 1 Distribution 1 Voltage Ballast Options KBS6 KBS8 KBE6 KBE8 High pressure sodium 35S 2 50S 70S 100S 150S Metal halide 3 50M 70m 100M Incandescent I 2, 4, 5 Standard flared cone R5 Type V distribution Optional cylindrical reflector CYA Specular alzak CYB Black alzak CYG Gold alzak CYF Flat black 120 208 6 240 6 277 347 TB 7 (blank) Magnetic ballast Shipped installed SF Single fuse, 120V, 277V, 347V DF Double fuse, 208V, 240V H24 24 overall height H30 30 overall height H36 36 overall height FD Festoon outlet FG Festoon outlet with duplex ground fault receptacle 8 CSA Meets Canadian standards Shipped separately S6S Half-shield (6 square) S6S Half-shield (6 square) KBAB Anchor bolts Finish 9 Lamped (blank) Dark bronze (std.) DWH White DBL Black DMB Medium bronze DNA Natural aluminum DSS Sandstone DGS Chargoal gray DTG Tennis green DBR Bright red DSB Steel blue SDDB Dark bronze stripe SDWH White stripe SDBL Black stripe SDNA Natural aluminum stripe SDTG Tennis green stripe SDBR Bright red stripe SDBUA Dark blue stripe SDYLB Yellow stripe LPI Lamp included L/LP Less lamp ADDITIONAL INFORMATION For additional product information, visit ORDERING INFORMATION Specifications subject to change.

Previous Page
Next Page