Product Selection Guide Page 711 Product Selection Guide-11th Edition

711 PSG11 LITHONIA LIGHTING OUTDOOR www.lithonia.com PRODUCT INFORMATION Intended Use For car lots, street lighting or parking areas. Features using a continuous seam-weld process for weathertight integrity rotatable and interchangeable for optimal control factor for 175W and above an electronic high frequency ballast splice compartment Listings UL Listed (standard). CSA Certified (see Options). UL Listed for 25C ambient and wet locations. Optical chamber is IP65 rated for ingress protection per IEC529 international standards. KVF AREA LIGHTING Specification ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com. Notes 1 Specify lamp type and distribution. See Configurations table. 2 Not available with SCWA. 3 Not available 480V. 4 Available with SYMDL, ASYDL and VFADL standard E-25 lamp. 5 Not available KVF1 SCWA with horizontal distributions. Not available SCWA with horizontal distributions in KVFL. 6 Must be ordered with SCWA. 450M only available in vertical distribution. 7 Must use reduced jacket lamp. 8 Not applicable with L/LP. 9 Designate DL (drop lens) or FL (flat lens) after distribution (ie SR2FL). SR4W only available with FL. 10 Must specify CWI for use in Canada. 11 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V. 12 Consult factory for available wattages. 13 Multi-volt electronic ballast (compact fluorescent only) capable of operating on any line voltage between 120V and 277V. 14 Tri-volt electronic ballast capable of operat- ing any line voltage between 200V and 277V. 15 Use 12" arm when mounting two luminaires at 90. 16 Maximum allowable wattage lamp included. 17 Not available 347, 480, or TB. Not available KVF2. 18 Not available KVF1. Photocell not included. 19 Available with 200M-400M SCWA: ASY, SYM or VFA; 250S or 400S: all distributions. 20 May be ordered as an accessory. 21 Prefix with fixture name and size (e.g., KVF1VG). 22 277/347/ 480T only. 23 Not available KVF1. 24 These wattages do not comply with Califor- nia Title 20 regulations (175M, 350M, 450M). CONFIGURATIONS SERIES LAMP TYPE DISTRIBUTION KVF1 55IL, 85IL Not Required KVF1 2/26DTT, 2/26TRT, 2/32TRT SYMDL, SYMFL, ASYDL, ASYFL, SR3DL, SR3FL KVF1 57TRT, 70TRT SR2DL, SR3DL, SR4SCDL, SR5SDL KVF1 42TRT, 50M, 50MHC, 70S, 70M, 70MHC, 100S, 100M, 100MHC, 150S, 150M, 150MHC, 175M SYMDL, SYMFL, ASYDL, ASYFL, SR2DL, SR2FL, SR3DL, SR3FL, SR4SCDL, SR4SCFL, SR5SDL, SR5SFL KVF1 175M SCWA, 200M SYMDL, SYMFL, ASYDL, ASYFL KVF2 250S, 250M, 320M, 350M, 400S, 400M SYMDL, SYMFL, ASYDL, ASYFL, VFADL, VFAFL, R2DL, R2FL, R3FL, R3DL, SR2FL, SR3FL, SR4SCFL, SR4WFL KVF2 450M SYMDL, SYMFL, ASYDL, ASYFL, VFADL, VFAFL KVF2 1000M SYMDL, SYMFL, ASYDL, ASYFL, VFADL, VFAFL, R2DL, R2FL, R3FL, R3DL KVF2 1000S ASYDL, SYMDL, VFADL DH S OH S A KVF1 KVF2 EPA ARM: 1.2 ft 2 (0.11m 2 ) 2.8 ft 2 (0.25 m 2 ) EPA PT: 1.3 ft 2 (0.12m 2 ) 2.8 ft 2 (0.25 m 2 ) Square: 16-1/8 (40.9) 21-1/2 (54.6) Flat lens height: 9-3/8 (23.8) 14 (35.6) Drop lens height: 11-3/8 (29.0) 17 (43.2) PT overall height: 18 (45.7) 22-3/4 (57.8) Weight: 29 lbs (13.2 kg) 55 lbs (24.9 kg) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. Example: KVF2 1000M SYMDL 480 SP09 LPI Series Lamp type 1 Distribution 9 Voltage Ballast Mounting KVF1 KVF2 High pressure sodium 2 70S 100S 150S 200S 250S 23 400S 23 1000S 4,23 Metal halide 50M 2,3 70M 2,3 100M 2 150M 175M 5,24 200M 5,6 250M 23 320M 6,23 350M 6,23,24 400M 23 450M 2,24 750M 6,23 775M 6,22,23 875M 6,22,23 1000M 7,23 Metal halide ceramic 100MHC 2 150MHC Horizontal lamp R2 Type II roadway R3 Type III asymmetric R4 Type IV, FT R4SC Type IV, FT, wide R5S Type V symmetric square SR2 Type II segmented SR3 Type III segmented SR4SC Type IV segmented, FT, sharp cutoff SR4W Type IV segmented FT, wide SR5S Type V segmented square Vertical lamp SYM Symmetric square ASY Asymmetric VFA Vertical forward throw, automotive 120 208 10 240 10 277 347 480 10 TB 11 23050HZ 12 (blank) Magnetic ballast CWI Constant wattage isolated 12 SCWA Super CWA ballast Arm mounting SP04 4" arm for square pole 15 RP04 4" arm for round pole 15 WB04 4" arm for wall WW04 4" arm for wood pole or wall SP09 9" arm for square pole 15 RP09 9" arm for round pole 15 WB09 9" arm for wall WW09 9" arm for wood pole or wall SP12 12" arm for square pole 15 RP12 12" arm for round pole 15 WB12 12" arm for wall WW12 12" arm for wood pole or wall Optional mounting, shipped separately 20 KMA External mast arm adapter DA12P 12" degree arm for pole DA12WB 12" degree arm for wall KTMB Twin mounting bar Options Finish Lamped Shipped installed SF Single fuse, 120V, 277V, 347V DF Double fuse, 208V, 240V, 480V EC Emergency circuit 17 QRS Quartz restrike system 17 PER NEMA twist-lock receptacle only 18 KW1 Kilowatch 120V control 19 KW4 Kilowatch 277V control 19 CSA Meets Canadian standards NOM Meets Mexican standards (consult factory) INTL Available for MH probe start shipping outside the U.S. Shipped separately PE1 NEMA twist-lock PE (120V-240V) PE3 NEMA twist-lock PE (347V) PE4 NEMA twist-lock PE (480V) PE7 NEMA twist-lock PE (277V) SC Shorting cap for PER option HS House-side shield 20 VG Vandal guard 20 (blank) Dark bronze (std.) DBL Black DGC Charcoal gray DMB Medium bronze DNA Natural aluminum DWH White CRT Non-stick protective coating (black) LPI Lamp included L/LP Less lamp ORDERING INFORMATION Specifications subject to change.

Previous Page
Next Page