Product Selection Guide Page 710 Product Selection Guide-11th Edition

PSG11 710 LITHONIA LIGHTING OUTDOOR www.lithonia.com PRODUCT INFORMATION AREA LIGHTING Intended Use For car lots, street lighting or parking areas. Features continuous seam-weld process for weathertight integrity interchangeable for optimal control factor for 175 and above to achieve the best power factor optional mountings are available Listings UL Listed (standard). CSA Certified or NOM Certified (see Options). UL Listed for 25C ambient and wet locations. IP65 rated. KSF Specification Notes 1 Specify lamp type and distribution. See Configurations table. 2 Not available with SCWA. 3 Universal, mogul base lamp allows KSF to be available with SCWA. 4 Must be ordered with SCWA. 5 Must use ED28 lamp. 6 Must use BT37 lamp with R5S. 7 Not applicable with L/LP. 8 Not available KSF3. 9 Not available KSF1. 10 Not available KSF2. 11 Must specify CWI for use in Canada. 12 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V. 13 Consult factory for available wattages. 14 KSF1, KSF2 must use 9" arm, KSF3 must use 12" arm when mounting two luminaires at 90. 15 May be ordered as accessory. 16 Must specify finish. 17 Maximum allowable wattage lamp included. 18 Photocell not included. 19 Available with 150S, 250S and 400S only. 20 Prefix with fixture name and size. VG: KSF1VG, KSF2VG. HS: KSF1HS, KSF2HS (for use with R2 or R3); KSF3HS (for use with R3 or R4). ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com. CONFIGURATIONS SERIES LAMP TYPE DISTRIBUTION KSF1 70S, 100S, 100M, 100MHC, 150S, 150M, 150MHC, 175M, 200M, 250M R2, R3, R4SC KSF2 250S, 320M, 350M, 400S, 400M R2, R3, R4SC, R4W, R5S KSF3 1000S, 1000M R3, R4, R5S H L W KSF1 KSF2 KSF3 EPA: 1.5 ft 2 (0.14 m 2 ) 2.0 ft 2 (0.19 m 2 ) 3.0 ft 2 (0.28m 2 ) Length: 21-1/4 (54.0) 24-5/8 (62.5) 29-5/8 (75.2) Width: 15-1/2 (39.3) 17-3/4 (45.1) 23-5/8 (59.9) Height: 7-1/4 (18.4) 8-3/8 (21.1) 10-1/2 (26.7) Max. weight: 35 lbs (15.9 kg) 52 lbs (23.6 kg) 80 lbs (36.3 kg) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. Example: KSF1 250S R3 TB SP09 LPI Series Lamp type 1 Distribution Voltage Ballast Mounting KSF1 KSF2 KSF3 High pressure sodium 2 70S 100S 150S 200S 250S 9 400S 9 1000S 9,10 Metal halide 100M 2 150M 175M 3 200M 4 250M 320M 4,5,9 350M 4,5,9 400M 5,9 750M 4,9,10 775M 4,9,10 875M 4,9,10 1000M 6,9,10 Metal halide ceramic 7 100MHC 2 150MHC R2 Type II roadway 8 R3 Type III asymmetric R4 Type IV, FT 9,10 R4SC Type IV, FT, wide 8, 9 R5S Type V symmetric square 9 120 208 11 240 11 277 347 480 11 TB 12 23050HZ 13 (blank) Magnetic ballast CWI Constant wattage isolated 13 SCWA Super CWA ballast Arm mounting SP04 4" arm for square pole 14 RP04 4" arm for round pole 14 WB04 4" arm for wall WW04 4" arm for wood pole or wall SP09 9" arm for square pole 14 RP09 9" arm for round pole 14 WB09 9" arm for wall WW09 9 " arm for wood pole or wall SP12 12" arm for square pole 14 RP12 12" arm for round pole 14 WB12 12" arm for wall WW12 12" arm for wood pole or wall Optional mounting, ships separately 15, 16 KMA External mast arm adapter DA12P 12" degree arm for pole DA12WB 12" degree arm for wall KTMB Twin mounting bar Options Finish Lamped Shipped installed SF Single fuse, 120V, 277V, 347V DF Double fuse, 208V, 240V, 480V EC Emergency circuit 17 QRS Quartz restrike system 17 PER NEMA twist-lock receptacle only 18 KW1 Kilowatch 120V control 19 KW4 Kilowatch 277V control 19 CSA Meets Canadian standards NOM Meets Mexican standards (consult factory) INTL Available for MH probe start shipping outside the U.S. Shipped separately 15 PE1 NEMA twist-lock PE (120V-240V) PE3 NEMA twist-lock PE (347V) PE4 NEMA twist-lock PE (480V) PE7 NEMA twist-lock PE (277V) SC Shorting cap for PER option HS House-side shield 20 VG Vandal guard 20 (blank) Dark bronze (std.) DBL Black DGC Charcoal gray DMB Medium bronze DNA Natural aluminum DWH White CRT Non-stick protective coating (black) LPI Lamp included L/LP Less lamp ORDERING INFORMATION Specifications subject to change.

Previous Page
Next Page