Product Selection Guide Page 708 Product Selection Guide-11th Edition

PSG11 708 LITHONIA LIGHTING OUTDOOR www.lithonia.com PRODUCT INFORMATION AREA LIGHTING Intended Use For parking areas, street lighting, walkways and car lots. Features to prevent intrusion of moisture or environmental contaminants optional specular segmented reflector is rotatable and interchangeable. KAC optics work in tandem with a light-diffusing lens KAC is available with either a prismatic, impact resistant, tempered glass lens, a drop dish acrylic lens or a drop dish polycarbonate lens factor for 175W and above to achieve the best power factor pole mounting. KADT is mounted using SPD04 with an additional backing plate and receiver to mount a suspend tension rod Listings UL Listed (standard). CSA Certified or NOM Certified (see Options). KAD UL Listed for 25C ambient and wet locations. IP65 Rated. General Purpose Example: KAD 400M R3 TB SCWA SPD09 LPI Series Lamp type Distribution Voltage Ballast Mounting 11 KAC KAD KADT High pressure sodium 1 70S 100S 150S 250S 400S Metal halide 70M 1, 2 100M 1 150M 175M 3 200M 4 250M 320M 4 350M 4 400M Metal halide ceramic 6 70MHC 1, 2 100MHC 1 150MHC KAD/KADT R2 Type II roadway 7 R3 Type III asymmetric 7 R4 Type IV, FT R5S Type V symmetric square SR2 Type II segmented 7 SR3 Type III segmented 7 SR4SC Type IV segmented, FT, sharp cutoff KAC - Lens FP Flat C73T DPA Drop acrylic DPP Drop polycarbonate 120 208 8 240 8 277 347 480 8 TB 9 23050HZ 10 (blank) Magnetic ballast CWI Constant wattage isolated 10 SCWA Super CWA ballast Shipped included SPD04 4" contoured arm for square pole RPD04 4" contoured arm for round pole WBD04 4" contoured arm for wall SPD09 9" contoured arm for square pole RPD09 9" contoured arm for round pole WBD09 9" contoured arm for wall Shipped separately 12, 13 KMA External mast arm adaptor DAD12P 12" contoured degree arm for pole DAD12WB 12" contoured degree arm for wall KTMB Twin mounting bar KADWBA Decorative wall bracket (up or down) Options Finish Lamped Shipped installed SF Single fuse, 120V, 277V, 347V DF Double fuse, 208V, 240V, 480V EC Emergency circuit 14 QRS Quartz restrike system 14 GMF Internal slow-blow fusing QRSTD QRS time delay 14 PER NEMA twist-lock receptacle only 15 PD Power tray 16 WTB Terminal block 16 HS House-side shield CSA Meets Canadian standards NOM Meets Mexican standards (consult factory) INTL Available for MH probe start shipping outside the U.S. Shipped separately 17 PE1 NEMA twist-lock PE (120V-240V) PE3 NEMA twist-lock PE (347V) PE4 NEMA twist-lock PE (480V) PE7 NEMA twist-lock PE (277V) SC Shorting cap for PER option VG Vandal guard 18 WG Wire guard 18 (blank) Dark bronze (std.) DBL Black DGC Charcoal gray DMB Medium bronze DNA Natural aluminum DWH White CRT Non-stick protective coating (black) LPI Lamp included L/LP Less lamp ORDERING INFORMATION Specifications subject to change. Notes 1 Not available with SCWA. 2 Not available with 480V. 3 Universal mogul base lamp allows KAD, KADT and KAC to be available with SCWA. 4 Must be ordered with SCWA. 5 Reduced jacket ED28 required for SR2, SR3, & SR4SC optics. 6 Not applicable with L/LP. 7 HS Option available 8 Must specify CWI for us in Canada. 9 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V. 10 Consult factory for available wattages. 11 9" arm required when two or more luminaries are oriented at 90. KADT only available with RPD04 or SPDO4 and only available at 90, 180 orientations. 12 May be ordered as accessory. Not available with KADT. 13 Must specify finish. 14 Maximum allowable wattage lamp included. 15 Photocell not included. 16 Only available with SR2, SR3, & SR4SC optics. 17 May be ordered as accessory. 18 Prefix with fixture name and size (e.g., KADWG). ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com. 17-1/2 (44.5) 7-1/8 (18.1) 11-1/8 (28.3) KAD/KAC (flat) KAC (drop) EPA: 1.2 ft 2 (0.11 m 2 ) 1.4 ft 2 (0.13 m 2 ) Max. weight: 35.9 lbs (16.3 kg) 34 lbs (15.4 kg) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 17-1/2 (44.5) 7-1/8 (18.1) KADT EPA: 1.2 ft 2 (0.11 m 2 ) Max. weight: 35.9 lbs (16.3 kg) KAD KAC KADT

Previous Page
Next Page