Product Selection Guide Page 702 Product Selection Guide-11th Edition

PSG11 702 LITHONIA LIGHTING OUTDOOR PRODUCT INFORMATION AREA LIGHTING Intended Use Streets, walkways, parking lots and surrounding areas. Features environmental contaminants fasteners and are rotatable and interchangeable, allowing for increased optical control disconnect plugs and a high power factor SCWA ballast for 175W and above electronic high frequency ballast with ensured alignment and leveling Listings Listed and labeled to UL standards for wet locations. Listed and labeled to CSA standards (see Options). NOM Certified (see Options). IP65 Rated. U.S. Patent No. D556,357. MR MRT Omero Architectural CONFIGURATIONS SERIES LAMP TYPE DISTRIBUTION MR1, MRT1 35S, 50S, 50M, 50MHC, 70S, 70M, 70MHC, 100S, 100M, 100MHC, 150S, 150M, 150MHC, 175M, 42TRT, 57TRT, 70TRT SR2, SR3, SR4SC, SR5S MR1, MRT1 2/32TRT, 2/42TRT SR3 MR1, MRT1 100IL Not applicable MR2, MRT2 175M, 200S, 200M, 250S, 250M, 320M, 350M, 400S, 400M SR2, SR3, SR4SC, SR4W, SR5S MR2, MRT2 150IL Not applicable DRILLING PATTERNS (SEE POLE ORDERING, PAGE 786) DM19AS 1 at 90 DM28AS 2 at 180 DM29AS 2 at 90 DM39AS 3 at 90 DM49AS 4 at 90 DM32AS 3 at 120 (round poles only) 25 (63.5) 8-1/4 (21.0) 18-5/8 (47.3) 24-1/2 (62.2) 33 (83.8) 6-3/8 (16.2) MR1/MRT1 MR2/MRT2 EPA: 0.54ft 2 (0.05 m 2 ) 0.91ft 2 (0.08 m 2 ) Max. weight: 27 lbs (12.2 kg) 46 lbs (20.9 kg) Induction weight: 35 lbs (15.9 kg) Notes 1 Specify lamp type and distribution. See Configurations table. 2 Not available with SCWA. 3 120V only. 4 120V and 277V only. 5 Not available with 480V. 6 Not available MR1/MRT1 SCWA. 7 Must be ordered with SCWA. 8 Not applicable with L/LP. 9 Available in SR3 only. 10 Must specify CWI for use in Canada. 11 Optional multi-tap ballast (120V, 208V, 240V, 277V). In Canada 120V, 277V, 347V; ships as 120V/347V. 12 Consult factory for available wattages. 13 Multi-volt electronic ballast (Compact fluorescent and Induction only) capable of operating on any line voltage between 120V and 277V. 14 Mounting block included standard. 15 Mounted in lens up orientation, fixture is damp location rated. MRT available in down orientation only. 16 May be ordered as accessory. Not available with MRT1. 17 Must specify finish. 18 Maximum allowable wattage lamp included. 19 Photocell not included. 20 SR2, SR3, SR4W only. 21 Prefix with fixture name and size (e.g., MR1VG). 22 Not available MR1 or MRT1. 23 These wattages require the REGCI option to be chosen for shipments into California for Title 20 Compliance. 250M REGC1 is not available in 347V or 480V. 24 These wattages do not comply with California Title 20 regulations. 25 See for additional color options. Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. ADDITIONAL INFORMATION For additional product information, visit Example: MR1 150M SR3 TB SPA LPI Series Lamp type 1 Distribution 1 Voltage Ballast Mounting 14 MR1 MR2 MRT1 MRT2 High pressure sodium 2 35S 3 50S 4 70S 100S 150S 200S 22 250S 22 400S 22 Metal halide 50M 2,5 70M 2,5 100M 2 150M 175M 6,24 200M 7,22 250M 22,23 320M 7,22 350M 7,22,24 400M 22,23 Metal halide ceramic 8 50MHC 2,5 70MHC 2,5 100MHC 2 150MHC Compact fluorescent 2/32TRT 9 42TRT 2/42TRT 9 57TRT 70TRT Induction 100IL 150IL 22 SR2 Type II segmented SR3 Type III segmented SR4SC Type IV segmented FT, sharp cutoff SR4W Type IV segmented, FT, wide SR5S Type V segmented, square 120 208 10 240 10 277 347 480 10 TB 11 23050HZ 12 MVOLT 13 (blank) Magnetic ballast CWI Constant wattage isolated 12 SCWA Super CWA ballast Shipped included SPA Square pole mounting block RPA Round pole mounting block WBA Wall bracket (up or down) 15 Shipped separately DCMR1 MR1 Deco arm for square pole DCMR1R MR1 Deco arm for round pole DCMR2 MR2 Deco arm for square pole DCMR2R MR2 Deco arm for round pole Options Finish 25 Lamped Shipped installed SF Single fuse, 120V, 277V, 347V DF Double fuse, 208V, 240V, 480V GMF Internal slow-blow fusing QRS Quartz restrike system 18 EC Emergency circuit 18 PER NEMA twist-lock receptacle 19 HS House-side shield 20 CSA Meets Canadian standards NOM Meets Mexican standards (consult factory) INTL Available for MH probe start shipping outside the U.S. Shipped separately 16 PE1 NEMA twist-lock PE (120V-240V) PE3 NEMA twist-lock PE (347V) PE4 NEMA twist-lock PE (480V) PE7 NEMA twist-lock PE (277V) SC Shorting cap for PER option VG Vandal guard 21 (blank) Dark bronze DBL Black DGC Charcoal gray DMB Medium bronze DNA Natural aluminum DWH White Super Durable Finishes DDBXD Dark bronze DBLXD Black DNAXD Natural aluminum DWHXD White DDBTXD Textured dark bronze DBLBXD Textured black DNATXD Textured natural aluminum DWHGXD Textured white LPI Lamp included L/LP Less lamp ORDERING INFORMATION Specifications subject to change. Visit Lithonia Lighting's POLES CENTRAL to see our wide selection of poles, accessories and educational tools. *Round pole top must be 3.25" O.D. minimum. **For round pole mounting (RPA) only.

Previous Page
Next Page