Product Selection Guide Page 634 Product Selection Guide-11th Edition

Series Lamp type 1 Lens Voltage Options 5 Lamped 10 VR3 8-1/2" x 8-1/2" VR4 11-3/4" x 11-3/4" Incandescent 2 (blank) Incandescent Twin-tube 3 7TT 2/7TT 9TT 2/9TT 13TT 2/13TT Double twin- tube 13DTT 2/13DTT 18DTT 2/18DTT 26DTT 2/26DTT Triple-tube 26TRT 2/26TRT 32TRT 42TRT (blank) Clear prismatic WP White polycarbonate 120 277 347 MVOLT 4 AL Aluminum backplate EC Emergency circuit (incandescent, 25W max) 6 DS Dual switching 4S Four screws per unit GLR Internal fast-blow fusing 7,8 IR Internal reflector NL Night light (incandescent, 7W max) 3,6 SM1 Single medium-base incandescent socket 9 XT Low-energy diode extended lamp life 9 CSA Meets Canadian standards LPI Lamp(s) included (standard) L/LP Less lamp(s) PRODUCT INFORMATION PSG11 ORDERING INFORMATION Specifications subject to change. Example: VR4 2/26DTT MVOLT LPI ROUGH SERVICE Intended Use General illumination for rough service (vandal-resistant) applications. Ideal for interior or exterior applications where safety and security are a concern. Features and contaminants mount for maximum vandal resistance Listings UL Listed. CSA Certified (see Options). For use in 25C ambient temperatures and wet locations. VR3 VR4 Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com. General Purpose www.lithonia.com CONFIGURATIONS SERIES LAMP TYPE VR3 75W 11 , 100W 12 , 150W 12,13 , 7TT, 2/7TT, 9TT, 2/9TT VR4 2/60W, 2/75W 12 , 100W 12 , 150W 12,13,14 , 7TT, 2/7TT, 9TT, 2/9TT, 13TT, 2/13TT, 13DTT, 2/13DTT, 18DTT, 2/18DTT, 26DTT, 2/26DTT, 26TRT, 2/26TRT, 32TRT, 42TRT ACCESSORIES ORDER SEPARATELY RK1 T20BIT TORX TX20 hex-base driver bit for tamper-resistant screws with center reject pin RK1 T20DRV TORX TX20 screwdriver for tamper-resistant screws with center reject pin Notes 1 See Configurations table for lamp compatibility. 2 Leave lamp type information blank for incandescent. 3 120V only. 4 Multi-volt electronic ballast (for DTT and TRT lamps) capable of operating on any line voltage between 120V and 277V. 5 For other options and accessories, see Accessories table. 6 Maximum wattage lamp provided. 7 Available for compact fluorescent units only. 8 Must specify voltage. Not available with MVOLT. 9 Available for incandescent units only. 10 Compact fluorescent lamp(s) included unless L/LP is specified. 11 Maximum ceiling-mount wattage. 12 Wall-mount only. 13 Available for base-up wall mounting using an A21 lamp. 14 Single-socket incandescent on wall: order SM1 option. Certain airborne contaminants can diminish integrity of acrylic and polycarbonate. Refer to the Acrylic & Polycarbonate Environmental Compatibility tables on pages 1116-1117 for suitable uses. LITHONIA LIGHTING DEMANDING ENVIRONMENTS L/W D VR3 VR4 Length/Width: 8-1/2 (21.6) 11-3/4 (29.8) Depth: 4-5/8 (11.7) 5-1/2 (14.0) 634

Previous Page
Next Page