Product Selection Guide Page 632 Product Selection Guide-11th Edition

PRODUCT INFORMATION PSG11 ROUGH SERVICE Intended Use General illuminations for rough service vandal resistant applications. Ideal for applications that require maximum light capabilities for safety and security. Features cell neoprene housing gasket (VR2C) lens tamper resistant Torx T20 screws or stainless steel hex Listings UL Listed. CSA Certified (see Options). NOM Certified (see Options). For use in 25C ambient temperatures and wet locations. VR1C VR2C General Purpose www.lithonia.com VR1C VR2C Notes 1 120V only. 2 Must specify IR or IHR on wall-mount HID units. 3 Multi-volt electronic ballast (for DTT and TRT lamps) capable of operating on any line voltage between 120V and 277V. 4 Available for compact fluorescent units only. 5 For other options and accessories, see Accessories table. 6 Maximum wattage lamp provided. 7 Must specify voltage. Not available with MVOLT. 8 Available for HID units only. 9 Lamp(s) included unless L/LP is specified. Certain airborne contaminants can diminish integrity of acrylic and polycarbonate. Refer to the Acrylic & Polycarbonate Environmental Compatibility tables on pages 1116-1117 for suitable uses. Series Lamp type Lens Voltage VR1C Opal lens VR2C Clear prismatic lens Twin-tube 7TT 2/7TT 13DTT 18DTT 26DTT Triple-tube 26TRT 32TRT 42TRT High pressure sodium 1,2 35S 50S 70S Metal halide 2 50M (blank) VR1C: White opal, VR2C: Clear prismatic HBE Horizontal black eyelid PBT Perimeter black trim VBE Vertical black eyelid 120 277 347 MVOLT 3, 4 Options 5 Lamped 9 EC Emergency circuit (incandescent, 25W max) 6 GLR Internal fast-blow fusing 4,7 GMF Internal slow-blow fusing 4,7 IHR Internal horizontal reflector 2 IR Internal reflector 2 NL Night light (incandescent, 7W max) 1,6 PE Photoelectric cell (button type) 7 SF Single fuse (120, 277, 347) 8 CSA Meets Canadian standards NOM Meets Mexican standards LPI Lamp included (standard) L/LP Less lamp ORDERING INFORMATION Specifications subject to change. Example: VR2C 50M 277 IR LPI Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com. ACCESSORIES ORDER SEPARATELY RK1 T20BIT TORX TX20 hex-base driver bit for tamper-resistant screws with center reject pin RK1 T20DRV TORX TX20 screwdriver for tamper-resistant screws with center reject pin 6-1/2 (16.5) 8-7/8 (22.5) 6-1/4 (15.9) All dimensions are shown in inches (centimeters) unless otherwise specified. LITHONIA LIGHTING DEMANDING ENVIRONMENTS 632

Previous Page
Next Page