Product Selection Guide Page 631 Product Selection Guide-11th Edition

Series Lamp type Voltage Options 3 Lamped 8 Opal polycarbonate lens VR1B Perimeter black trim VR1BV Vertical black eyelid VR1BH Horizontal black eyelid Clear prismatic lens VR2B Perimeter black trim VR2BV Vertical black eyelid VR2BH Horizontal black eyelid Twin-tube 1 7TT Double twin-tube 13DTT Triple-tube 26TRT 32TRT 120 277 347 MVOLT 2 EC Emergency circuit (incandescent, 25W max) 4,5 GLR Internal fast-blow fusing 6 GMF Internal slow-blow fusing 6 NL Night light (incandescent, 7W max) 1,4,5 PE Photoelectric cell (button type) 6 SCB Surface conduit backbox, black 7 CSA Meets Canadian standards LPI Lamp included (standard) L/LP Less lamp PRODUCT INFORMATION PSG11 ORDERING INFORMATION Specifications subject to change. Example: VR1B 7TT 120 LPI Intended Use Decorative luminaire for general illumination of rough service (vandal resistant) applications. Ideal for applications that require maximum light capabilities for safety and security. Features powder coat neoprene to seal out contaminants (VR2B) lens resistant Torx T20 screws or stainles steel hex head screws (two of each included) electromagnetic, NPF Listings UL Listed. CSA Certified (see Options). UL Listed for 25C ambient temperatures and wet locations. VR1B VR2B ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com. ROUGH SERVICE General Purpose www.lithonia.com VR1BV VR1B VR1BH ACCESSORIES ORDER SEPARATELY RK1 T20BIT TORX TX20 hex-base driver bit for tamper-resistant screws with center reject pin RK1 T20DRV TORX TX20 screwdriver for tamper-resistant screws with center reject pin SCB Surface conduit backbox, black Notes 1 120V only. 2 Multi-volt electronic ballast (for DTT and TRT lamps) capable of operating on any line voltage between 120V and 277V. 3 For other options and accessories, see Accessories table. 4 Maximum wattage lamp provided. 5 Available for single-lamp units only. 6 Must specify voltage. Not available with MVOLT. 7 Replaces standard backbox. UL Listed for damp locations. 8 Lamp included unless L/LP is specified. Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. Certain airborne contaminants can diminish integrity of acrylic and polycarbonate. Refer to the Acrylic & Polycarbonate Environmental Compatibility tables on pages 1116-1117 for suitable uses. LITHONIA LIGHTING DEMANDING ENVIRONMENTS 8-1/2 (21.6) 5-7/8 (14.9) 5-1/2 (14.0) 631

Previous Page
Next Page