Product Selection Guide Page 629 Product Selection Guide-11th Edition

Series Trim 1 Number of lamps 2 Lamp type Diffuser Voltage VRT 1' wide 2VRT 2' wide G Lay-in grid F Overlapping flange 1 2 3 4 6 Not included. 17 17W T8 (24") U31 31W T8-U (24", 1-5/8" leg) U316 31W T8-U (24", 6" leg) 3 32 32W T8 (48") CF40 40W T5 (24") 28T5 28W T5 54T5HO 54W T5HO AR12 #12 pattern high-impact acrylic, .140" thick ARF12 #12 pattern high-impact acrylic with RF grid, .140" PCL12187 #12 pattern polycarbonate, .187" VL .250" clear polycarbonate lens laminated to A12 pattern acrylic overlay, .125" acrylic MVOLT 120 277 347 Ballast configuration Ballast Options 4 (blank) Standard configuration 1/3 One 3-lamp ballast 1/4 One 4-lamp ballast GEB10IS T8 and CF electronic ballast, 10% THD, instant start GEB10PS Electronic ballast, 10% THD programmed rapid start GEB10PS90 Electronic ballast, 10% THD, programmed rapid start, 90C case temp. CSA Meets Canadian standards NOM Meets Mexican standards 1/4 One 4-lamp ballast PRODUCT INFORMATION PSG11 ORDERING INFORMATION Specifications subject to change. Example: 2VRT G 4 32 AR12 MVOLT GEB10IS Intended Use General illumination for rough service (vandal resistant) applications. Ideal for areas that require higher levels of protection from physical assault, while providing proper illumination for safety and security. Features doorframe corners eliminate light leaks Listed, CSA with standard ballast, sound rated A ceilings Listings UL Listed to U.S. and Canadian Safety Standards (see options). NOM Certified (see Options). For use in 25C ambient temperatures and damp locations. VRT ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com. ROUGH SERVICE General Purpose www.lithonia.com CONFIGURATIONS NOMINAL SIZE SERIES NUMBER OF LAMPS LAMP TYPE DEPTH WIDTH 1' x 4' VRT 1, 2, 3 32 4-1/2 (11.4) 12 (30.5) 2' x 2' 2VRT 2 17, U31, U316, CF40 3-3/4 (9.5) 24 (61.0) 2' x 2' 2VRT 3 17, U31 3-3/4 (9.5) 24 (61.0) 2' x 2' 2VRT 4 17 3-3/4 (9.5) 24 (61.0) 2' x 4' 2VRT 2, 3, 4, 6 32 3-3/4 (9.5) 24 (61.0) ACCESSORIES ORDER SEPARATELY RK1 T20BIT TORX TX20 hex-base driver bit for tamper-resistant screws with center reject pin RK1 T20DRV TORX TX20 screwdriver for tamper-resistant screws with center reject pin Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. Notes 1 Consult factory for screw slot and ST trim. 2 See Configurations table for lamp compatibility. 3 Not available on 3-lamp fixtures. 4 For other options and accessories, see Accessories table. Certain airborne contaminants can diminish integrity of acrylic and polycarbonate. Refer to the Acrylic & Polycarbonate Environmental Compatibility tables on pages 1116-1117 for suitable uses. LITHONIA LIGHTING DEMANDING ENVIRONMENTS W D 629

Previous Page
Next Page