Product Selection Guide Page 625 Product Selection Guide-11th Edition

Series Number of lamps 1 Lamp type Lens Voltage VDC Corner-mount VDS Surface-mount 1 2 Not included. 28T5 28W T5 (46) 32 32W T8 (48") 54T5HO 54W T5HO (46") 2 (blank) Clear polycarbonate PCLW White polycarbonate MVOLT 120 277 347 Ballast Options 3 GEB10IS T8 electronic ballast, 10% THD, instant start GEB10RS T8 electronic ballast, 10% THD, programmed rapid start (347V only) GEB10PS Electronic ballast, 10% THD, programmed rapid start GEB10PS90 T5HO 90 electronic ballast, 10% THD, programmed rapid start AL Aluminum housing,white EL14DW Wet location battery pack (1400 lumens) 4, 5 GLR Internal fast-blow fusing 4 RIF1 Radio interference filter, one per fixture STS Stainless steel housing, natural STSW Stainless steel housing, white CSA Meets Canadian standards NOM Meets Mexican standards PRODUCT INFORMATION PSG11 ORDERING INFORMATION Specifications subject to change. Example: VDC 2 32 MVOLT GEB10IS Intended Use General illumination for rough service (vandal resistant) applications. Designed for indoor and outdoor applications like corridors, walkways, pedestrian tunnels, canopies, and drive-thru areas. Features rolled steel for strength polycarbonate lens tamper-resistant screws white polyester powder paint Listed, CSA with standard ballast, sound rated A for corner (VDC) or surface (VDS) mounting Listings UL Listed for wet locations (in covered ceiling applications only). UL Listed for -20F(-29C) to 77F(25C) ambient temperatures. CSA Certified or NOM Certified (see Options). VDC VDS ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com. ROUGH SERVICE General Purpose www.lithonia.com CONFIGURATIONS SERIES NUMBER OF LAMPS LAMP TYPE WIDTH DEPTH LENGTH VDC 1, 2 32 7-1/2 (19.1) 6-1/8 (15.6) 50-1/8 (127.3) VDC 2 28T5, 54T5HO 7-1/2 (19.1 6-1/8 (15.6) 50-1/8 (127.3) VDS 1, 2 32 7-5/8 (19.4) 4-1/2 (11.4) 50-5/8 (128.6) VDS 2 28T5, 54T5HO 7-5/8 (19.4) 4-1/2 (11.4 50-5/8 (128.6) ACCESSORIES ORDER SEPARATELY RK1 T20BIT TORX TX20 hex-base driver bit for tamper-resistant screws with center reject pin RK1 T20DRV TORX TX20 screwdriver for tamper-resistant screws with center reject pin Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. Notes 1 See Configurations table for lamp compatibility. 2 Must be specified with GEB10PS90 ballast. 3 For other options and accessories, see Accessories table. 4 Must specify voltage. 5 Luminaires ordered with DW option (Example: EL14DW) will bear UL Emergency Lighting Equipment label for damp or wet locations, depending on fixture. Certain airborne contaminants can diminish integrity of acrylic and polycarbonate. Refer to the Acrylic & Polycarbonate Environmental Compatibility tables on pages 1116-1117 for suitable uses. LITHONIA LIGHTING DEMANDING ENVIRONMENTS 7-1/2 (19.1) VDC VDS 6-1/8 (15.6) 4-1/2 (11.4) 7-5/8 (19.4) 625

Previous Page
Next Page