Product Selection Guide Page 622 Product Selection Guide-11th Edition

PRODUCT INFORMATION PSG11 Series Lumens/Color temperature 1 Lens Voltage 2 Options VRR LED 1L 1,500 lumens (blank) 4000K, 70 CRI 3L 3,000 lumens 50 5000K, 70 CRI 4L 4,000 lumens CP Clear prismatic polycarbonate WP White prismatic polycarbonate DHL Drop Holophane FHL Flat Holophane L/Lens Less lens 120 120V 277 277V ALDF Aluminum door frame SF Single fuse 2 BSL722 Bodine emergency LED battery pack for 0C and up 3 BSL722C Bodine emergency LED battery pack for -20C and up 3 DIM Pre-wired for 0-10V low voltage dimming (100%- 10%) L/SP Less surge protector ORDERING INFORMATION Specifications subject to change. Example: VRR LED 3L CP 120 ROUGH SERVICE Intended Use General illumination for rough service (vandal resistant) applications. Ideal for interior and exterior applications where safety and security are a concern such as retail, under canopies, gas stations, and bank drive thrus. Features rolled steel Torx T20 or standard stainless steel slotted hex-head screws (four of each included) coat for high reflectance, durability, and corrosion resistance the less lens option metal core circuit board and integral aluminum heat sinks to maximize heat dissipation THD<20% (0 to 10 volt dimming standard) C-channel bar hangers (not included) Listings CSA Certified to UL and cUL Standards. Luminaire is rated for wet locations in covered-ceiling applications and IP64 rated for glass lens and less lens options only. Rated for 25C ambient temperatures. VRR LED General Purpose Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. ADDITIONAL INFORMATION For additional product information, visit ACCESSORIES ORDER SEPARATELY RK1 T20BIT Hex-base driver bit, Torx T20, for tamper-resistant screws with center reject pin. RK1 T20DRV Torx T20 screwdriver for use with tamper-resistant screws with center reject pin. PF Plaster frame; provides a clean edge for ceiling openings. VRRGA 2 X 2 NEMA G grid adapter, textured white 1-3/8 (3.5) 1 (2.5) 10-3/4 (27.0) 13-1/4 (33.6) 12-7/8 (32.7) 13-3/8 (34.0) Ceiling opening Notes 1 The CCT value provided is of lamp source and actual CCT will vary upon levels. 2 Must specify voltage. 3 Available with 1L and 3L only. Certain airborne contaminants can diminish integrity of acrylic and polycarbonate. Refer to the Acrylic & Polycarbonate Environmental Compatibility tables on pages 1116-1117 for suitable uses. LITHONIA LIGHTING DEMANDING ENVIRONMENTS 622

Previous Page
Next Page