Product Selection Guide Page 618 Product Selection Guide-11th Edition

Series Lamp type Lens Voltage Ballast configuration 4 Low-profile (ADA) VGR1 3.7" deep VGR2 4" deep VGR4 4.1" deep 1 VGR5C 4" deep Twin-tube 2 13TT 2/13TT Double twin-tube 13DTT 2/13DTT 18DTT 2/18DTT 26DTT 2/26DTT Triple Tube 26TRT 2/26TRT 32TRT 42TRT (blank) Polycarbonate GL Borosilicate glass SBP Starburst pattern polycarbonate 120 277 347 MVOLT 3 (blank) Standard configuration 2/1 Two 1-lamp ballasts Ballast Finish 5 Options 6 Lamped 11 (blank) Standard ballast ADCF ADVANCE electronic fluorescent ballast MOTCF OSRAM SYLVANA electronic fluorescent ballast TUBCF Universal Lighting Technologies electronic fluorescent ballast Standard textured colors DWHG DBLB White Black DDBT Dark bronze DNAT Natural Aluminum DSST Sandstone DS Dual switching, two ballasts GLR Internal fast-blow fusing 7 GMF Internal slow-blow fusing 7 NLCF Night-light (compact fluorescent 9W max) 2,4,8,9 TRS CSA NOM Tamper-resistant screws 10 Meets Canadian standards Meets Mexican standards LPI Lamp(s) included (std.) L/LP Less lamp(s) PRODUCT INFORMATION PSG11 ROUGH SERVICE Intended Use Architectural low-profile luminaire provides general illumination for rough service (vandal resistant) applications. Ideal for interior or exterior applications where safety and security are a concern. Features white, black or bronze Listings UL Listed to U.S. and Canadian Safety Standards (see Options). NOM Certified (see Options). For use in 25C ambient temperatures and wet locations. IP65 rated. VGR Gateway, Steel Backplate Architectural Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. ADDITIONAL INFORMATION For additional product information, visit ACCESSORIES ORDER SEPARATELY RK1 T10DRV TORX T10 screwdriver for Gateway set screws RK1 T20BIT TORX T20 hex-base driver bit for TRS option RK1 T20DRV TORX T20 screwdriver for TRS option VGRDS XXX Decorative shroud 12 ORDERING INFORMATION Specifications subject to change. Notes 1 Not ADA compliant. 2 120V only. 3 Multi-volt electronic allast (for DTT and TRT lamps), capable of operating on any line voltage between 120V and 277V. 4 Available for single-lamp units only. 5 For additional colors, see Architechtural Colors brochure on 6 For other options and accessories, see Accessories table. 7 Must specify voltage. Not available with MVOLT. 8 Maximum wattage lamp included. 9 Cannot be field installed. 10 Stainless steel TORX T20 screws with center reject pin. 11 Lamp(s) included unless L/LP is specified. 12 Must specify color (example: VGRDS DWHG). Example: VGR1 42TRT GL MVOLT DWHG TRS LPI Certain airborne contaminants can diminish integrity of acrylic and polycarbonate. Refer to the Acrylic & Polycarbonate Environmental Compatibility tables on pages 1116-1117 for suitable uses. 13-3/4 (34.9) 3-3/4 (9.5) VGR1 13-3/4 (34.9) 4 (10.2) VGR2 4 (10.2) 13-3/4 (34.9) VGR5 13-3/4 (34.9) 4-1/8 (10.5) VGR4 LITHONIA LIGHTING DEMANDING ENVIRONMENTS 618

Previous Page
Next Page