Product Selection Guide Page 617 Product Selection Guide-11th Edition

Series Lamp type Lens Voltage Ballast configuration Deep profile VGO1C 6.7" deep VGO2C 6.9" deep VGO3C 6.9" deep VGO4C 7" deep VGO5C 6.9 deep Double twin-tube 13DTT 18DTT 26DTT Triple-tube 26TRT 32TRT 42TRT High pressure sodium 50S Metal halide 1 50M Ceramic metal halide 50MHC (blank) Polycarbonate GL Borosilicate glass 120 2 208 2 240 2 277 347 TB 2, 3 MVOLT 4, 5 (blank) Standard ballast ADCF Advance electronic fluorescent ballast MOTCF OSRAM SYLVANIA electronic fluorescent ballast TUBCF Universal Lighting Technologies electronic fluorescent ballast ADEZ Advance Marx X electronic dimming ballast 6,7 DMHL LUTRON Hi-lume electronic dimming ballast 6,7 Finish 8 Options 9 Lamped 13 Standard textured colors DWHG White DBLB Black DDBT Dark bronze DNAT Natural aluminum DSST Sandstone SF Single fuse, 120V, 277V 2,7 DF Double fuse, 208V, 240V 2,7 EC Emergency circuit (incandescent, 25W max) 7 QRS Quartz restrike system 2,10 TRS Tamper-resistant screws 12 NL Night light (incandescent, 7W max) 10,11 PE Photoelectric cell (button type) 7 CSA Meets Canadian Standards LPI Lamp(s) included (std.) L/LP Less lamp(s) PRODUCT INFORMATION PSG11 ORDERING INFORMATION Specifications subject to change. Example: VGO1C 50S TB DWHG PE LPI Intended Use Architectural low-profile luminaire provides general illumination for rough service (vandal resistant) applications. Ideal for interior or exterior applications where safety and security are a concern. Features (1% copper alloy (1% copper) housing perimeter for maximum light output black or bronze Listings UL Listed to U.S. and Canadian Safety Standards (see Options). NOM Certified (see Options). For use in 25C ambient temperatures and wet locations. IP65 rated. VGOC Gateway, Cast Housing ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com. ROUGH SERVICE Architectural www.lithonia.com ACCESSORIES ORDER SEPARATELY RK1 T10DRV TORX T10 screwdriver for Gateway set screws RK1 T20BIT TORX T20 hex-base driver bit for TRS option RK1 T20DRV TORX T20 screwdriver for TRS option Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. Notes 1 Low-UV lamp is included and recommended for replacement. 2 Available for HID units only. 3 Multi-tap ballast-US: 120V, 208V, 240V, 277V; CA: 120/357V. 4 Multi-volt electronic ballast (for DTT and TRT lamps) capable of operating on any line voltage between 120V and 277V. 5 Available for compact fluorescent units only. 6 Available with 26DTT, 26TRT and 32TRT. 7 Must specify voltage. Not available with MVOLT or TB. 8 For additional colors, see Architectural Colors brochure on www.lithonia.com. 9 For other options and accessories, see Accessories table. 10 Maximum wattage lamp included. 11 120V only. 12 Stainless steel TORX T20 screws with center reject pin. 13 Lamp(s) included unless L/LP is specified. Certain airborne contaminants can diminish integrity of acrylic and polycarbonate. Refer to the Acrylic & Polycarbonate Environmental Compatibility tables on pages 1116-1117 for suitable uses. VGO1 VGO2 VGO3 VGO4 VGO5 LITHONIA LIGHTING DEMANDING ENVIRONMENTS 9-1/2 (24.1) 6-3/4 (17.1) 13-3/4 (34.9) 6-7/8 (17.5) 13-3/4 (34.9) 9-1/2 (24.1) 13-3/4 (34.9) 6-7/8 (17.5) 9-1/2 (24.1) 9-1/2 (24.1) 7 (17.8) 13-3/4 (34.9) 9-1/2 (24.1) 6-7/8 (17.5) 13-3/4 (34.9) 617

Previous Page
Next Page