Product Selection Guide Page 616 Product Selection Guide-11th Edition

PRODUCT INFORMATION PSG11 ROUGH SERVICE Intended Use Architectural low-profile luminaire provides general illumination for rough service (vandal resistant) applications. Ideal for interior or exterior applications where safety and security are a concern. Features perimeter for maximum light output black or bronze Listings UL Listed to U.S. and Canadian Safety Standards (see Options). NOM Certified (see Options). For use in 25C ambient temperatures and wet locations. IP65 rated. VGRC Gateway, Cast Housing Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. Series Lamp type Lens Voltage Ballast configuration Deep profile VGR1C 6.7" deep VGR2C 6.9" deep VGR4C 7" deep VGR5C 6.9" deep Incandescent 1, 2 (blank) 100W Double twin-tube 13TT 13DTT 2/13DTT 18DTT 26DTT 2/26DTT Metal halide 3 50M 70M 100M Triple-tube 26TRT 2/26TRT 32TRT 2/32TRT 42TRT 2/42TRT High pressure sodium 50S 70S (blank) Polycarbonate GL Borosilicate glass SBP Starburst pattern polycarbonate 120 208 4 240 4 277 347 TB 4,5 MVOLT 6,7 (blank) Standard ballast ADCF Advance electronic fluorescent ballast MOTCF OSRAM SYLVANIA electronic fluorescent ballast TUBCF Universal Lighting Technologies electronic fluorescent ballast ADEZ Advance Marx X electronic dimming ballast 8,9 DMHL LUTRON Hi-lume electronic dimming ballast 8,9 Finish 10 Options 11 Lamped 19 Standard textured colors DWHG White DBLB Black DDBT Dark bronze DNAT Natural aluminum DSST Sandstone ELDW Wet location battery pack (750 max lumens) 7,8,12 DS Dual switching, two ballasts 7 SF Single fuse, 120V, 277V 4,8 DF Double fuse, 208V, 240V 4,8 EC Emergency circuit (incandescent, 25W max) 13,14 GLR Internal fast-blow fusing 7,8 GMF Internal slow-blow fusing 7,8 NL Night light (incandescent, 7W max) 13,14,15 PE Photoelectric cell (button type) 8,16 QRS Quartz restrike system 4,13 TRS Tamper-resistant screws 17 VGRDS Decorative shroud 18 CSA Meets Canadian Standards LPI Lamp(s) included (std.) L/LP Less lamp(s) ORDERING INFORMATION Specifications subject to change. Example: VGR1C 70M 120 DWHG LPI ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com. Architectural www.lithonia.com ACCESSORIES ORDER SEPARATELY RK1 T10DRV TORX T10 screwdriver for Gateway set screws RK1 T20BIT TORX T20 hex-base driver bit for TRS option RK1 T20DRV TORX T20 screwdriver for TRS option VGRDS XXX Decorative shroud 20 Certain airborne contaminants can diminish integrity of acrylic and polycarbonate. Refer to the Acrylic & Polycarbonate Environmental Compatibility tables on pages 1116-1117 for suitable uses. VGR2 VGR1 VGR4 VGR5 Notes 1 Leave lamp type information blank. 2 Lamp not included. 3 Low-UV lamp is included and recommended for replacement. 4 Available for HID units only. 5 Multi-tap ballast-U.S: 120V, 208V, 240V, 277V; Canada: 120V/347V. 6 Multi-volt electronic ballast (for DTT and TRT lamps) capable of operating on any line voltage between 120V and 277V. 7 Available for compact fluorescent units only. 8 Must specify voltage. Not available with MVOLT or TB. 9 Available with 26DTT, 26TRT and 32 TRT. 10 For additional colors, see Architectural Colors brochure on www. lithonia.com. 11 For other options and accessories, see Accessories table. 12 42TRT max, wattage, up to 42TRT or 2/18DTT. 13 Maximum wattage lamp included. 14 Available for single-lamp units only. 15 120V only. 16 Not available with DS. 17 Stainles steel TORX T20 screws with center reject pin. 18 Color will be the same as the bezel. 19 Lamp included unless L/LP is specified. 20 Must specify color (example: VGRDS DWHG). LITHONIA LIGHTING DEMANDING ENVIRONMENTS 6-3/4 (17.1) 13-3/4 (34.9) 6-7/8 (17.5) 13-3/4 (34.9) 13-3/4 (34.9) 6-7/8 (17.5) 13-3/4 (34.9) 7 (17.8) 616

Previous Page
Next Page