Product Selection Guide Page 615 Product Selection Guide-11th Edition

PRODUCT INFORMATION PSG11 Series Lumen output 1 /Color temperature 2 Lens Voltage Paint finishes 3 Options Lamp VGO1C VGO2C VGO3C VGO4C VGO5C Lumen ouput 1 40LED 40W 25LED 25W Color temperature 2 (blank) 3500K 41 4100K (blank) Polycarbonate GL Borosilicate glass 120 277 MVOLT Standard textured finishes DWHG White DBLB Black DDBT Dark bronze DNAT Natural aluminum DSST Sandstone Shipped installed in fixture DF Double fuse 4, 5 SF Single fuse 5 DS Dual switching MSI8 Wet location motion sensor 5, 6 PE Photoelectric cell 5, 7 TRS Tamper-resistant screws 8 NOM Meets Mexican standards LPI Lamp included LPIAMB Amber LEDs Example: VGO1C 40LED 120 DBLB SF LPI ORDERING INFORMATION Specifications subject to change. Intended Use Architectural low-profile luminaire provides general illumination for rough service (vandal resistant) applications. Ideal for interior or exterior applications where safety and security are a concern. Features (<1% copper) housing circuit boards reduced by half while maintaining even illumination across the 2 boards perimeter for maximum light output black or bronze. Optional architectural colors available (see options) Listings UL Listed to U.S. and Canadian Safety Standards (see Options). NOM Certified (see Options). For use in 25C ambient temperatures and wet locations. IP65 rated. VGOC LED ADDITIONAL INFORMATION For additional product information, visit ROUGH SERVICE Architectural Certain airborne contaminants can diminish integrity of acrylic and polycarbonate. Refer to the Acrylic & Polycarbonate Environmental Compatibility tables on pages 1116-1117 for suitable uses. Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. LED SPECIFICATION MATRIX System watts Initial delivered lumens through polycarbonate lens* Initial delivered lumens through glass lens* mA Ambient temperature C 3500K 4100K 3500K 4100K 50 1785 2490 1265 1770 700 30 40 1320 1970 930 1390 500 30 * 3500K and 4100K are LED CCTs. ACCESSORIES ORDER SEPARATELY RK1 T10DRV Torx TX10 screwdriver, for use with Gateway set screws. RK1 T20BIT Hex-base driver bit, Torx TX20, for tamper-resistant screws with center reject pin. RK1 T20DRV Torx TX20 screwdriver for use with tamper-resistant screws with center reject pin. VGO1 VGO2 VGO3 VGO4 VGO5 Notes 1 Refer to table. 2 The CCT value provided is of lamp source and actual CCT will vary upon power levels. 3 For additional colors, refer to Architectural Paint brochure. 4 Must specify DS option. 5 Must specify voltage. Not available with MVOLT. 6 Provided with lens for mounting up to 8. 7 Not available with DS option. 8 T-20 screws with center reject pin. LITHONIA LIGHTING DEMANDING ENVIRONMENTS 9-1/2 (24.1) 6-3/4 (17.1) 13-3/4 (34.9) 6-7/8 (17.5) 13-3/4 (34.9) 9-1/2 (24.1) 13-3/4 (34.9) 6-7/8 (17.5) 9-1/2 (24.1) 9-1/2 (24.1) 7 (17.8) 13-3/4 (34.9) 9-1/2 (24.1) 6-7/8 (17.5) 13-3/4 (34.9) 615

Previous Page
Next Page