Product Selection Guide Page 614 Product Selection Guide-11th Edition

Series Lumen output 1 /Color temperature 2 Lens Voltage Paint finishes 3 Options Lamp VGR1C VGR2C VGR4C VGR5C Lumen output 1 50LED 50W 40LED 40W Color temperature 2 (blank) 3500K 41 4100K (blank) Polycarbonate GL Borosilicate glass MVOLT 120 277 Standard textured finishes DWHG White DBLB Black DDBT Dark bronze DNAT Natural aluminum DSST Sandstone Shipped installed in fixture DF Double fuse 4 SF Single fuse DS Dual switching MSI8 Wet location motion sensor 5 PE Photoelectric cell 6, 7 TRS Tamper-resistant screws 8 VGRDS Decorative shroud 9, 10 NOM Meets Mexican standards LPI Lamp included LPIAMB Amber LEDs PRODUCT INFORMATION PSG11 ORDERING INFORMATION Specifications subject to change. Example: VGR1C 50LED 120 DWHG SF LPI ROUGH SERVICE Intended Use Architectural low-profile luminaire provides general illumination for rough service (vandal resistant) applications. Ideal for interior or exterior applications where safety and security are a concern. Features (<1% copper) housing circuit boards reduced by half while maintaining even illumination across the 2 boards perimeter for maximum light output black or bronze Listings UL Listed to U.S. and Canadian Safety Standards (see Options). NOM Certified (see Options). For use in 25C ambient temperatures and wet locations. IP65 rated. VGRC LED Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. ADDITIONAL INFORMATION For additional product information, visit Architectural Certain airborne contaminants can diminish integrity of acrylic and polycarbonate. Refer to the Acrylic & Polycarbonate Environmental Compatibility tables on pages 1116-1117 for suitable uses. Notes 1 Refer to table. 2 The CCT value provided is of lamp source and actual CCT will vary upon power levels. 3 For additional colors, refer to Architectural Paint brochure. 4 Must specify DS option. 5 Provided with lens for mounting up to 8'. 6 Must specify voltage. Not available with MVOLT. 7 Not available with DS option. 8 T-20 screws with center reject pin. 9 Color will be the same as the bezel. 10 Maximum operating ambient temperature is 25C when using this accessory. 11 Must specify color (Example: VGRDS DWHG). LED SPECIFICATION MATRIX System watts Initial delivered lumens through polycar- bonate lens* Initial delivered lumens through glass lens* mA Ambient temperature C 3500K 4100K 3500K 4100K 50 1785 2490 1265 1770 700 30 40 1320 1970 930 1390 500 30 * 3500K and 4100K are LED CCTs. ACCESSORIES ORDER SEPARATELY RK1 T10DRV Torx TX10 screwdriver, for use with Gateway set screws. RK1 T20BIT Hex-base driver bit, Torx TX20, for tamper-resistant screws with center reject pin. RK1 T20DRV Torx TX20 screwdriver for use with tamper-resistant screws with center reject pin. VGRDS XXX Decorative shroud 10, 11 VGR1 LITHONIA LIGHTING DEMANDING ENVIRONMENTS 6-3/4 (17.1) 13-3/4 (34.9) VGR2 6-7/8 (17.5) 13-3/4 (34.9) VGR5 13-3/4 (34.9) 7 (17.8) VGR4 13-3/4 (34.9) 7 (17.8) 614

Previous Page
Next Page