Product Selection Guide Page 604 Product Selection Guide-11th Edition

Series Lumens /Color temperature 1 Diffuser Distribution Voltage FHE LED 15" x 52 5L 5,000 lumens (blank) 4100K, (65 CRI) 7L 7,000 lumens 27 2700K, (85 CRI) 9L 9,000 lumens 35 3500K, (85 CRI) 12L 12,000 lumens 57 5700K, (70 CRI) 15L 15,000 lumens AMB Amber LEDs ( blank ) Clear acrylic PCL FST Clear polycarbonate Frosted acrylic ( blank ) General distribution SD Spread distribution 2 ( blank ) MVOLT; 120-277V HVOLT HVOLT; 347V-480V, 60HZ only 120 120V 277 277V 347 347V (60HZ only) 480 480V (60HZ only) Options 3 CS89 Cord set - NEMA type SEOOW 16/3, 6, 600V, white, no plug, wet location 4 CS89L12 Cord set - NEMA type SEOOW 16/3, 12, 600V, white, no plug, wet location 4 CS88 Cord set-Brad Harrison 3P male straight 600V molded plug, 6 type STOOW yellow PVC cord, 16/3 4 CS88L12 Cord set-Brad Harrison 3P male straight 600V molded plug, 12 type STOOW WLF Wet location fitting (two pre-installed, 40 offcenters) WLFEND Wet location fitting (open end) WLFEND2 Wet location fitting (both ends) 5 L/SP DIM PMP Less surge protector Pre-wired for 0-10V low-voltage dimming (100-10%) 4 Pendant monopoint 6 MHKB Stainless steel V-hook and brackets MSI__ Wet location fitting 360 motion sensor pre-wired for ON/OFF operation 4,7,8 TRS Tamper-resistant Torx T10 screws 9 NOM Meets Mexican standards DLC DesignLights Consortium qualified product 10 ORDERING INFORMATION Specifications subject to change. PRODUCT INFORMATION PSG11 Example: FHE LED 15L/57 FST FOOD PROCESSING Intended Use Ideal for use in food and beverage processing, cold storage, natatoriums, and garden centers. Fiberglass enclosure protects fixture while remaining easy to service and clean. Features poured in-place, closed cell gasket polycarbonate predicted life of more than 100,000 hours entry provisions with water tight plugs are standard suspension with aircraft cable (cable not included) Listings CSA Certified to UL and cUL standards for ambient temperatures for -22F(-29C) to -104F(40C) depending on lumen package selected. NOM Certified (see Options). Suitable for wet locations. Covered ceiling not required to maintain wet location or IP ratings. IP65, IP66, and IP67 rated and certified to meet NSF splash Zone 2. NEMA 4X rated. 1500 PSI hose-down. DesignLights Consortium qualified product. FHE LED High-Pressure Hose-Down ADDITIONAL INFORMATION For additional product information, visit 14-5/8 (37.1) 6 (15.2) Specifications Length: 52.0 (132.0) Width: 14-5/8 (37.1) Depth: 6 (15.2) Weight: 36 lbs. (12.7 kg) ACCESSORIES ORDER SEPARATELY FHEMHKB Stainless steel V-hook and brackets FHEEMK End mount suspension bracket 11 FHERMK Rigid mounting bracket MHCH36 3 Double chain 12 LCF Light/Glare control film MHHK120 10 single leg aircraft cable 13 MHHK120SS 10 single leg aircraft cable, stainless steel 13 FHEACT120 10 Y-toggle aircraft cable FHEACT240 20 Y-toggle aircraft cable RK1 T10DRV Torx T10 screwdriver for TRS option Certain airborne contaminants can diminish integrity of acrylic and polycarbonate. Refer to the Acrylic & Polycarbonate Environmental Compatibility tables on pages 1116-1117 for suitable uses. Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. LED SPECIFICATION MATRIX 14 LUMENS WATTS LUMENS PER WATT mA NUMBER OF BOARDS MAX. AMBIENT TEMPERATURE RECOMMENDED LIGHT SOURCE COMPARISON 5,000 66 76 525 4 40C 2-lamp 32W T8 1-lamp 54W T5HO 100MH 7,000 86 81 350 8 40C 3-lamp 32W T8 2-lamp 54W T5HO 9,000 118 76 525 8 40C 4-lamp 32W T8 150MH 12,000 152 79 350 12 25C 3-lamp 54W T5HO 175MH 15,000 215 74 525 12 25C 6-lamp 32W T5HO 4-lamp 54W T5HO 250MH 1 The CCT value provided is of lamp source and actual CCT will vary upon levels. 2 Only available with 41K. Not available on 5L. 3 For additional options consult factory. 4 Cordsets, MSI_, and DIM options are not available on the same fixture. Combination of two only (ex. cordset and DIM, cordset and MSI_, etc.). 5 Not available with cord, sensor or photocell options. 6 Housing pre-drilled with WLF in center; additional sup- port cables required. 7 For mounting up to 8, specify MSI8; for mounting up to 20, specify MSI20; for mounting up to 40, specify MSI40. 8 Must specify voltage. 9 Stainless steel Torx T10 screws with center reject pin. 10 Please see specification sheet on for complete list of qualified products. 11 Not available with HVOLT, 347, or 480. 12 For use with MHKB option. 13 For use with EMK option. 14 Values based on 41K LEDs and clear acrylic lens. Calculations are estimated results for general informational purposes only. Results may vary depending on the application. LITHONIA LIGHTING DEMANDING ENVIRONMENTS 604

Previous Page
Next Page