Product Selection Guide Page 536 Product Selection Guide-11th Edition

Series Lamp type Distribution Voltage Ballast configuration FAL Aisle lighter, 8' FAL12 Aisle lighter, 12' FAL16 Aisle lighter, 16' Lamps installed 1 54L 54W T5HO 32L 32W T8 28L 28W T5 Unlamped 54 54W T5HO 32 32W T8 28 28W T5 (blank) Focus distribution, no uplight, SC < 0.9 (blank) MVOLT 2 347 347V 480 480V 3 (blank) Standard configuration (see table) 1/4 One 4-lamp ballast 2/2 Two 2-lamp ballasts Ballast Lamp color Options (blank) T5HO electronic ballast, 10% THD, programmed rapid start (blank) T8 electronic ballast, 10% THD, instant start, high BF (blank) T5 electronic ballast, 10% THD, programmed rapid start GEB10IS T8 electronic ballast, 10% THD, instant start, normal BF T5HO (blank) F54T5HO/841 LP830 F54T5HO/830 LP835 F54T5HO/835 LP850 F54T5HO/850 T5HO Amalgam 4 LP841A F54T5HO/841 LP830A F54T5HO/830 LP835A F54T5HO/835 T8 (blank) F32T8/741 LP730 F32T8/730 LP735 F32T8/735 T5 (blank) 28T5/841 LP835 28T5/835 LP850 28T5/850 EL14 Emergency battery pack (1400 lumens) 5, 6 GLR Internal fast-blow fuse 6 OCS OnePass installed 6 PAF Powder coat after fabrication WGI Wireguard, 11-gauge, PAF MSI Occupancy sensor pre-wired 6 PRODUCT INFORMATION PSG11 536 ORDERING INFORMATION Specifications subject to change. Example: FAL 54L HIGH BAY Intended Use FAL provides peak optical performance with maximum fixture efficiency for aisle lighting in industrial, commercial and retail applications. T5 is ideal for mounting heights up to 50, and T8 for mounting heights up to 35 in climate-controlled spaces. Us- ing high-performance optics will reduce the number of fixtures required and maximize energy savings. Features components during shipment and installation wiring specular aluminum Listings UL Listed to U.S. and Canadian safety standards for 25C ambient temperatures. Suitable for damp locations. FAL Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. ADDITIONAL INFORMATION For additional product information, visit Fluorescent LITHONIA LIGHTING INDUSTRIAL CONFIGURATIONS NOMINAL SIZE SERIES FIXTURE CONFIGURATION NUMBER OF LAMPS 7.2 x 8 (18.3 x 243.8) FAL 8' section 2 7.2 x 12 (18.3 x 365.8) FAL12 4' + 8' section 3 7.2 x 16 (18.3 x 487.7) FAL16 Two 8' sections 4 STANDARD BALLAST CONFIGURATIONS LAMP TYPE 8' 12' 16' T5HO One 2-lamp ballast One 3-lamp ballast One 4-lamp ballast T8 (0.88 BF) One 2-lamp ballast One 3-lamp ballast One 4-lamp ballast T8 (1.2 BF) One 2-lamp ballast One 3-lamp ballast Two 2-lamp ballasts 28 T5 ACCESSORIES ORDER SEPARATELY HSD36 Chain hanger, 36" WGFAL Wireguard, 43" 6 7-3/8 (18.7) 3-5/8 (9.2) Notes 1 Unless otherwise specified, lamps installed are F54T5HO/841 for T5HO, F32T8/741 for T8, or 28T5/841 for T5. 2 120-277V. 3 For use with T5HO. Consult factory for use with T8. 4 Not for use with sensors or EL14. 5 UL Listed for 40C ambient. Consult factory for 6-lamp fixtures. Output in emergency mode varies with ambient temperature (approximately 944 lumens at 25C and 911 lumens at 45C). Single-lamp operation only. Not available with HVOLT. Requires some assembly in field for 6-lamp fixture. 6 Specify voltage. Certain airborne contaminants can diminish integrity of acrylic and polycarbonate. Refer to the Acrylic & Polycarbonate Environmental Compatibility tables on pages 1116-1117 for suitable uses.

Previous Page
Next Page