Product Selection Guide Page 527 Product Selection Guide-11th Edition

LITHONIA LIGHTING INDUSTRIAL PRODUCT INFORMATION 527 PSG11 Intended Use Ideal one-for-one replacement of conventional high bay systems such as HID and fluorescent. Applications include warehousing, manufacturing, and other large indoor spaces with mounting heights ranging up to 60. Features superior cooling through natural convection reflective Alanod MIRO-SILVER specular aluminum Listings CSA Certified to U.S. and Canadian safety standards. Damp location listed. Suitable for ambient temperatures from -40F (-40C) to 131F (55C). Patent pending. DesignLights Consortium qualified product. IBL I-BEAM LED ADDITIONAL INFORMATION For additional product information, visit HIGH BAY LED LITHONIA LIGHTING INDUSTRIAL Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. Series Lumens Distribution Lens Voltage Color temperature IBL 9L 9,000 lumens 12L 12,000 lumens 18L 18,000 lumens 24L 24,000 lumens 36L 36,000 lumens 1 48L 48,000 lumens 1 WD Wide ND Narrow (blank) No shielding SD125 Semi-diffuse acrylic (blank) MVOLT; 120-277V HVOLT 347-480V 120 120V 277 277V LP740 DLC 70 CRI, 4000K CCT LP750 DLC 70 CRI, 5000K CCT LP740 70 CRI, 4000K CCT LP750 70 CRI, 5000K CCT ORDERING INFORMATION Specifications subject to change. Example: IBL 18L WD LP740 DLC Options Finish GLR Internal fast-blow fuse 2,3 OUTCTR Wiring leads pulled through back center of fixture 4 OCS RELOC OnePass 5 installed 2 IMP Integrated modular plug 5,6 12412 IOTA emergency LED battery pack for 32F to 104F (0C to 40C) ambient 7,8 SPD Surge protector 2 WGX Standard wireguard, installed Cord sets: 9 CS1W Straight plug, 120V 10 CS3W Twist-lock, 120V 10 CS7W Straight plug, 277V 10 CS11W Twist-lock, 277V 10 CS25W Twist-lock, 347V 10 CS97W Twist-lock, 480V 10 CS93W 600 SEOOW white cord, no plug (no voltage required) Motion sensors: MSE360 360 motion sensor embedded, high bay 2,11 MSE360LB 360 motion sensor embedded, low bay 2,11 MSIPED Aisle motion sensor, photo sensor, pre-wired 2,12 MSI360PED 360 motion sensor, photo sensor, pre-wired 2,12 MSI Aisle motion sensor, pre-wired 2 MSI360 360 motion sensor, pre-wired 2 MSID Aisle motion sensor, pre-wired, HI/LO dimming control 2,12 MSI360D 360 motion sensor, pre-wired, HI/LO dimming control 2,12 NMSI nLight, aisle motion sensor, pre-wired 2 NMSI360 nLight enabled, 360 motion sensor, pre-wired 2 nEPP5D nLight dimming module 2,13 nSP5D nLight dimming module 14 (blank) Gloss white with textured dark gray accents DWH Gloss white Unlensed (standard) 9-24L pictured Lensed (optional) 36-48L pictured Notes 1 Fixtures more than 24" wide can interfere with the operation of some fire sprinkler systems. Verify specific installation requirements with local fire official and insurance carrier. Emergency battery packs are not available with 36L or 48L. 2 Specify voltage. 3 Not available with 347 voltage. 4 OUTCTR required when pendant monopoint is being used as the wiring compartment. 5 Must be factory-installed. 6 Must have "IMP" power cord to power fixture. 7 Must specify voltage. 120V or 277V only. Not avail- able with cord set w/plug or OUTCTR option. 8 Not available with 36L or 48L lumen package. 9 All cord sets are 18/3, 6', white. 10 Cord sets are voltage-specific. Specify voltage. Other configurations available. Consult factory. 11 Not available with battery pack. Not field- installable. 12 After 7.5 minutes, the luminaire will dim to 10%, then after an additional 2.5 minutes, the luminaire will turn off. The controls are field-programmable in many configurations. Contact Lithonia Lighting tech support for custom programming from factory. 13 Consult factory for dimming of 208V, 347V or 480V fixtures. 14 Requires bus power such as nPP16 power pack from Sensor Switch. 15 95F (35C) maximum ambient temperature when using the THUN. 16 Must have IMP option on fixture. 1-1/16 (2.7) 2-1/8 (5.4) 2-15/16 (7.4) 36L-48L Shown with optional pendant monopoint. 2-15/16 (7.6) 9L-24L Certain airborne contaminants can diminish integrity of acrylic and polycarbonate. Refer to the Acrylic & Polycarbonate Environmental Compatibility tables on pages 1116-1117 for suitable uses. CONFIGURATIONS LUMEN PACKAGE WATTAGE WEIGHT (LENS IT ADDS APPROX. 7 LBS.) COMPARABLE LIGHT SOURCE 120V 277V 347V 480V 9L 103 98 101 100 12.5 lbs. (5.7 kg) 2-lamp T5HO 12L 134 131 135 134 12.5 lbs. (5.7 kg) 4-lamp T8, 250W HID 18L 213 199 205 202 17.5 lbs. (7.9 kg) 4-lamp T5HO, 6-lamp T8, 400W HID 24L 262 258 266 263 17.5 lbs. (7.9 kg) 6-lamp T5HO, 8-lamp T8 36L 423 417 430 425 35 lbs. (15.9 kg) 8-lamp T5HO, 750 HID 48L 531 511 526 521 35 lbs. (15.9 kg) 10-lamp T5HO,1000W HID ACCESSORIES ORDER SEPARATELY Mounting: Cord sets and sensors for IMP option: Field-installable door and lens assemblies: IBAC120 M20 Aircraft cable 10' with hook (one pair) CS1WIMP Straight plug, 120V 9,10,16 DLIBL SD125 Semi-diffuse acrylic lens for use 9L - 24L IBAC240 M20 Aircraft cable 20' with hook (one pair) CS3WIMP Twist-lock, 120V 9,10,16 DLIBL48 SD125 Semi-diffuse acrylic lens for use with 36L and 48L IBHMP Hook monopoint CS7WIMP Straight plug, 277V 9,10,16 Wire guards: ZACVH Aircraft 10 V hanger (one pair) 8 CS11WIMP Twist-lock, 277V 9,10,16 WGIBL Wireguard for use with 9L - 24L IBLPMP Pendant monopoint splice box, includes side covers for use with 9L-24L CS25WIMP Twist-lock, 347V 9,10,16 WGIBL48 Wireguard for use with 36L and 48L IBLPMPHB Straight plug, 120V 5 CS93WIMP 600V SO white cord, no plug (no voltage required) 9, 16 IBLPMP48 Twist-lock, 120V 5 CS97WIMP Twist-lock, 480V 9,10,16 IBLPMPHB48 Straight plug, 277V 5 MSIIMP Aisle sensor 6,16 HC36 Twist-lock, 277V 5 MSI360IMP 360 sensor 6,16 THUN Tong hanger bracket (one pair) 8,15

Previous Page
Next Page