Product Selection Guide Page 470 Product Selection Guide-11th Edition

4 (10.2) 5-1/4 (13.3) 13-1/4 (33.7) 12-1/4 (31.1) 4 (10.2) 4-1/2 (11.4) L3 5-1/4 (13.3) 4 (10.2) 4-1/2 (11.4) 5-3/4 (14.6) 10-1/8 (25.7) L3R LED & INCANDESCENT PSG11 www.lithonia.com 470 4" IC/NON-IC Housings & Trims Intended Use Recessed incandescent housings for 2x8 and 2x6 new construction (L3 and L3LED T24) or remodel (L3R and L3RLED T24) applications. Approved for direct burial in insulation and all ceiling and wiring types. Features Recessed housing rated IC/NON-IC for new construction or remodel applications L3 and L3LED T24: Air-tight, galvanized steel pan with aluminum can and junction box L3R and L3RLED T24: Air-tight, aluminum housing with heavy-gauge galvanized steel raceway arm utilizing remodel clips for installation in plaster, sheetrock or mechanical ceilings Retaining clips are riveted to top of reflector to hold trim inside housing Two side-mounted torsion springs on the trim and two receiving brackets in the can ensure a tight fit Suitable for ceilings up to 1 - 1/2" thick 120V applications Compatible with Acculamp LED lamps; see pages 1044-1049 for options Listings UL Listed to U.S. and Canadian safety standards. ORDERING INFORMATION Specifications subject to change. Example: L3 3B1 L3/L3R L3LED T24/ L3RLED T24 L3LED T24 L3R LITHONIA LIGHTING RESIDENTIAL DOWNLIGHTING Series Reflector Options L3 New construction rough-in L3R Remodel rough-in L3LED T24 New construction rough-in LED base (see p. 467 for 4" LED module options) L3RLED T24 Remodel rough-in LED base (see p. 467 for 4" LED module options) Choose reflector below. Housing and reflector may be ordered separately. PHC Poke-home wire connectors GSKT Foam gasketing aids in air-tight installation Open narrow flange Shallow baffle Deep baffle Adjustable eyeball 301 White 301MW Matte white 301A Clear diffuse, white plastic flange 301AZ Clear specular, white plastic flange 3O1A PFMW Clear diffuse, matte white plastic flange 301BN Brushed nickel 1 3010RB Oil-rubbed bronze 1 IC 35 PAR20 30 R30 NON-IC 50 PAR20 3B1 Black, white flange 3B1 TRMW Black, matte white flange 3B1W White 3B1MW Matte white 3B1BN Brushed nickel 1 3B1ORB Oil-rubbed bronze 1 IC 30 R20 35 PAR20 50 R20 (white only) 50 PAR20 (white only) NON-IC 50 PAR20 3B2 Black, white flange 3B2W White, white flange IC 30 R20 (white only) 35 PAR20 (white only) NON-IC 50 PAR20 (black only) 50 R20 (black only) 25 Vertical tilt 3E1 White 3E1MW Matte white 3E1BN Brushed nickel 1 3E1ORB Oil-rubbed bronze 1 IC 50 R20 50 PAR20 Wallwash Pinhole WETlite 3W1 White 1-1/2" 4-7/8" NON-IC 50 R20 50 PAR20 3S1 White 2" 4-7/8" IC 35 PAR20 NON-IC 50 PAR20 3H2O White 3H2OMW Matte white 3H2OBN Brushed nickel 1 3H2OORB Oil-rubbed bronze 1 IC 75PAR30 (Outdoor rated; lamp included) 3-1/2" 4-7/8" 4" 5-1/4" ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com. ACCESSORIES ORDER SEPARATELY CTR3 4" goof ring, white ATK3 4" air-tight trim kit Notes 1 Flange matches trim finish. Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 3-1/2" 4-7/8" IC/NON-IC Rated Full Reflectors: All reflectors are damp location listed. WETlite is wet location listed. Lamp types and maximum wattages are listed for each reflector. White flange standard, except as noted. 2-5/8" 3-1/2" 4-7/8" 3-1/2" 4-7/8" PRODUCT INFORMATION

Previous Page
Next Page