Product Selection Guide Page 451 Product Selection Guide-11th Edition

PRODUCT INFORMATION 451 PSG11 ADDITIONAL INFORMATION For additional product information, visit Notes 1 Not available with ECOS or WLP. 2 Electronic multi-volt ballast capable of operating any line voltage from 120-277V, 50 or 60Hz. 3 Not available with EL or ELR. 4 For additional options, see 5 Add 3"(7.6) to width and 4-1/2"(11.4) to length. 6 Not recommended for field installation. LIGHT COMMERCIAL 6" Horizontal Intended Use Ideal for a wide variety of low- to medium-height ceiling applications including commercial, retail and hospitality spaces where open reflectors are required. Features Galvanized steel mounting frame with mechanical trim retention (yoke) ensures secure and flush reflector mount- ing to ceiling Mounting frame has cutout section for remodel applications when installation from below is necessary Frames equipped with galvanized junction box UL Listed for through wire applications Maximum 1-1/2" ceiling thickness Aluminum full reflectors are optically designed to maximize lumen output and to provide superior glare control Black or white baffled reflectors have a semi-specular upper finish with a white painted flange standard Listings Fixtures are UL Listed for through-branch wiring, NON-IC recessed mounting, damp location, and to U.S. and Canadian safety standards. 6HF 1/TRT 1-Lamp, Triple-Tube (TRT) Series Wattage/ Lamp Reflector/Color Lens type Voltage Options 4 6HF 1/18DTT 1/26DTT 1/18TRT 1/26-42TRT 1 1/26TRT 1/32TRT 1/42TRT 1/57TRT Choose reflector below. Housing and reflector may be ordered separately. Lamp types and maximum wattages are listed for each reflector. (blank) No lens CGL Clear glass lens T73 Tempered glass prismatic lens PCL Clear polycarbonate lens MVOLT 2 120 277 347 3 ADEZ Advance Mark 10 electronic dimming ballast, 120V or 277V. Minimum dimming level 5%. Must be wattage and voltage specific. ECOS Lutron EcoSystem electronic dimming ballast, 120V - 277V. Must be wattage specific. Minimum dimming level 5%. EL Emergency PSDL3 DL battery pack with integral test switch 5 ELR Emergency PSDL3 DL battery pack with remote test switch 5 ELHL IOTA I-420-R high lumen output emergency battery pack. Internal test switch provided. Maximum average lumen output 1300 (42W). 6 ELRHL IOTA I-420-EM-B high lumen output emergency battery pack. Remote test switch provided. Maximum averagelumen output 1300 (42W). 6 GMF Single slow-blow fuse, must specify voltage BDP Ballast disconnect plug (meets codes that require in-fixture disconnect) 3 RIF1 Radio interference filter WLP 35K lamp (shipped separately) ORDERING INFORMATION Specifications subject to change. Example: 6HF 1/26-42TRT F6B5 MVOLT Baffle reflector/Color Open reflector/Color Wallwash reflector/Color Wet lens reflector/Color F6B5 Black F6B5W White F6O21 White open F6O1A Clear diffuse open F6O1AZ Clear semi-diffuse open F6O1G Gold diffuse open F6O1GZ Gold semi-specular open F6O1PR Pewter diffuse open F60TWTZ Wheat semi-specular open F6W4 White F6W4A Clear diffuse F6W4AZ Clear semi-specular F6W4G Gold diffuse F6W4GZ Gold semi-specular F6W4PR Pewter diffuse F6W4WTZ Wheat semi-specular F6LS1 White splay, clear lens F6LSB1 Black baffle, clear lens F6LS4 White splay, fresnel lens F6LSB4 Black baffle, fresnel lens F6LS73 White splay, tempered prismatic lens F6LSB73 Black baffle, tempered prismatic lens F6LSD3 White splay, drop opal lens F6LSDB3 Black baffle, drop opal lens 7-1/2 (19.1) 6-3/8 (16.2) 11-3/8 (28.9) 8-1/2 (21.6) 13-1/4 (33.7) 12-7/8 (32.7) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 6-3/8 (16.2) 6 (15.2) 7-1/2 (19.1) Specifications Max. height: 6-3/8 (16.2) Ceiling opening: 7 (17.8) Overlap trim: 7-1/2 (19.1) Length: 13-1/4 (33.7) Width: 12-7/8 (32.7) LITHONIA LIGHTING COMMERCIAL DOWNLIGHTING

Previous Page
Next Page