Product Selection Guide Page 437 Product Selection Guide-11th Edition

PRODUCT INFORMATION 437 PSG11 Series Lamp type Voltage Options RT5D (blank) 1/26-42TRT 1 1/26TRT One 26W TRT lamp 1/32TRT One 32W TRT lamp 1/42TRT One 42W TRT lamp 1/26DTT One 26W DTT lamp (blank) MVOLT 2 120 120V 3 277 277V 3 347 347V 4 EL Emergency battery pack; integral test switch provided 5 ELR Emergency battery pack; remote test switch provided 5 GMF Single, slow-blow fuse 3,5 ADEZ Advance Mark 10 electronic dimming ballast, 120V or 277V; minimum dimming level 5% 3,5 ECOS ECOS Lutron EcoSystem electronic dimming ballast, 120V or 227V; must be voltage specific. Minimum dimming level 5% 1,3,5 WLP 35K lamp (shipped separately) BDP Ballast disconnect plug (meets codes that require in-fixture disconnect) 4 NEPP Interface for Sensor Switch nLight network with integral power supply. Refer to TN-623-01. CP Chicago Plenum 4 ORDERING INFORMATION Specifications subject to change. Example: RT5D ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com. Notes 1 Not available with ECOS or WLP. 2 Electronic multi-volt ballast capable of operating any line voltage from 120-277V, 50 or 60Hz. 3 Wattage and voltage must be specified when ordering with GMF, ADEZ and ECOS. 4 Not available with EL, ELR. 5 Not available in 347V. VOLUMETRIC Recessed Volumetric Downlighting www.lithonia.com Intended Use Provides volumetric lighting by filling the entire volume of space with light, delivering the ideal amount of light to walls, cubicles, work surfaces and people. Typical applications include corridors, lobbies, conference rooms and private offices. RT5D will fill the space with light without glare or cave effect of traditional downlights. In addition, RT5D with a single 32W triple-tube lamp provides up to 30% energy savings when compared to common two-lamp, 26W double twin-tube downlight. Features mechanical trim retention integral yoke to retain optical system linear facets softens and distributes light into the space (ships separately) 2-3/4 vertical adjustment, held in place with wingnuts from above or below the ceiling and smoothly washes the reflector with light Listings Fixtures are UL Listed for through-branch wiring, NON-IC recessed mounting, damp location, and to U.S. and Canadian safety standards. RT5D 1'x1' Horizontal Lamp, Triple-Tube (TRT) 4-1/2 (11.4) 10-5/8 (27.0) 13-5/8 (34.6) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. Specifications Aperture: 10-5/8 (27.0) Ceiling Opening: 11-1/4 X 11-1/4 (28.58 X 28.58) Overlap Trim: 13-5/8 (34.4) Height: 4-1/2 (11.4) Length: 25-1/2 (64.8) Standard Width: 15 (38.1) EL Width: 16-1/2 (41.9) LITHONIA LIGHTING COMMERCIAL DOWNLIGHTING

Previous Page
Next Page