Product Selection Guide Page 434 Product Selection Guide-11th Edition

PRODUCT INFORMATION PSG11 434 LED DOWNLIGHTING Intended Use For use with common 6 installed housings for retrofit applications. New Construction use with housings L7X, LC6, or L7XLED T24 (dedicated LED connector). Remodel or install from below applications use with L7XR or L7XRLED T24 (dedicated LED connector). LED module for use in retrofit / remodel or new construction applications where energy savings, long-life, and functional delivered light levels are required. The Reality LED module provides 80% energy savings over the 65W BR30 and replicates the beam pattern and useful light levels of these fixtures. It will maintain at least 70% light output for 50,000 hours in a typical lC environment. The Reality LED module is the most economical means to create a well-lit environment with exceptional energy efficiency and near zero maintenance. Features provides a 38 degree or 67 degree full width half max (FWHM) beam angle based on distribution chosen to prevent glare and provide a traditional look operation for long life wiring errors sections; fits into most popular 6 housings Listings REALITY ESL (ENERGY STAR) module: CSA Certified to U.S. and Canadian safety standards. Wet location listed. ENERGY STAR qualified. REALITY Residential ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com. LED Module www.lithonia.com Notes 1 Total system delivered lumens. 2 Must be ordered on separate line. Series/Finish Type Lumen output 1 Color temperature Distribution Voltage Series Finish REAL6 D6 6ENERGY STAR MW Matte white retrofit module A Clear diffuse AZ Clear specular BN Brushed nickel BLZ Black specular BZA Antique bronze ORB Oil-rubbed bronze WT Wheat diffuse ESL ENERGY STAR listed 600L 8W, 600 lumens 1000L 11W, 1000 lumens 27K 2700K 30K 3000K 35K 3500K 40K 4000K .60SC .60 spacing criteria .90SC .90 spacing criteria (blank) 120V Example: REAL6 D6MW ESL 1000L 35K .60SC Options PFMW Matte white plastic flange ring PFBL Black plastic flange ring L7X New construction rough-in 2 L7XR Remodel rough-in 2 LC6 New construction rough-in 2 L7XLED T24 New construction rough-in (LED connector) L7XLED T24 SDT 277V NON-IC 277V stepdown transformer (277V to 120V) (LED connector) L7XRLED T24 Remodel rough-in (LED connector) LC6LED T24 New construction rough-in (LED connector) ISH Insect shield NEPP Interface for Sensor Switch nLight network with integral power supply. Refer to TN-623-01. ORDERING INFORMATION Specifications subject to change. 5-15/16 (15.1) 6-5/8 (17.0) Max. 7-1/2 (19.1) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. Specifications Aperture: 4-3/8 (11.1) Ceiling opening: As rough-in Overlap trim: 7-1/2 (19.1) Height: 6-5/8 (17.0) max. Weight (module only): 2.8 lbs. Weight (module and carton): 3.96 lbs. LITHONIA LIGHTING COMMERCIAL DOWNLIGHTING

Previous Page
Next Page