Product Selection Guide Page 33 Product Selection Guide-11th Edition

PRODUCT INFORMATION 33 PSG11 Intended Use The VT Series is an economical solution for applications requiring high vertical illumination with low brightness. The volumetric distribution of the single acrylic basket is carefully managed at high angles, providing just enough intensity to deliver the volumetric performance. Features refractor providing a quiet appearance in the ceiling available for compliance with common energy codes dark shadows and opens up the space with controlled distribution Listings UL Listed to U.S. and Canadian safety standards. Patent pending. 2VT 2x2, 2x4 ADDITIONAL INFORMATION For additional product information, visit www.lithonia.com. Notes 1 MVOLT (120-277V) 50-60Hz. 2 Not available with 32T8 GEB10PS. 3 Not available with 28T5. 4 Must specify 120 or 277. 5 347V only. RECESSED Volumetric Architectural LITHONIA LIGHTING COMMERCIAL INDOOR www.lithonia.com Series Air function Number of lamps Wattage Diffuser Voltage Ballast configuration Ballast Lamp Options 2VT5 T5 Volumetric troffer 2VT8 T8 Volumetric troffer (blank) Static H Heat removal 1 2 3 14T5 14W T5 (22") 17 17W T8 (24") 24T5HO 24W T5HO (24") 28T5 28W T5 (46") 32 32W T8 (48") 54T5HO 54W T5HO (46") ADP Acrylic linear prismatic (blank) MVOLT 1 347 347V 2 (blank) One or two lamps, per Lithonia Lighting standards 1/3 One, three-lamp ballast 3 GEB10IS T8 electronic, <10%THD, instant start GEB10PS T5 and T8 electronic, <10% THD, programmed start GEB95 T5 electronic, <10% THD, .95 ballast factor, programmed start GEB95S T5 electronic, <10% THD, .95 ballast factor, step dimming, programmed start LP835 80 CRI, 3500K LP841 80 CRI, 4100K LP830 80 CRI, 3000K LP735 70 CRI, 3500K LP741 70 CRI, 4100K LP730 70 CRI, 3000K GLR Fast-blow fuse 4 RSW Smooth reflector EL14 Emergency battery pack, 1400 lumens EL Emergency battery pack CSA Meets Canadian standards 5 ORDERING INFORMATION Specifications subject to change. Example: 2VT8 2 32 ADP MVOLT GEB10IS LP835 Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. Specifications(2x2) Length: 24 (61.0) Width: 24 (61.0) Depth: 4-3/8 (11.1) ACCESSORIES ORDER SEPARATELY 2VT4 F916 Trim to adjust fixture mounting flush with v9/16" T-bar; for 2x4 fixture 2VT2 F916 Trim to adjust fixture mounting flush with 9/16" T-bar; for 2x2 fixture DGA24 Drywall ceiling adaptor , unit installation (2x4) DGA22 Drywall ceiling adaptor , unit installation (2x2) Specifications(2x2) Length: 24 (61.0) Width: 24 (61.0) Depth: 4-3/8 (11.1) Specifications(2x4) Length: 48 (122.0) Width: 24 (61.0) Depth: 4-3/8 (11.1) 8-1/4 (21) 24 (61.0) 4-3/8 (11.1) CONFIGURATIONS SERIES NOMINAL SIZE NUMBER OF LAMPS LAMP TYPE BALLAST DESCRIPTION VT5 2 X 2 1 14T5 GEB10PS Standard, set light output, 1.0 BF VT5 2 X 2 2 14T5 GEB10PS Standard, set light output, 1.0 BF VT5 2 X 2 2 14T5 GEB115 Standard, set light output, 1.15 BF VT5 2 X 2 3 14T5 GEB115S Standard, step dimming, 1.15 BF VT5 2 X 2 1 24T5HO GEB10PS High Light, set light output, 1.0 BF VT5 2 X 2 2 24T5HO GEB10PS High Light, set light output, 1.0 BF VT5 2 X 2 3 24T5HO GEB10PS High Light, set light output, 1.0 BF VT5 2 X 4 1 28T5 GEB10PS Standard, set light output, 1.0 BF VT5 2 X 4 2 28T5 GEB95 Standard, set light output, 0.95 BF VT5 2 X 4 2 28T5 GEB95S Standard, step dimming, 0.95 BF VT5 2 X 4 3 28T5 GEB10PS Standard, set light output, 1.0 BF VT5 2 X 4 1 54T5HO GEB10PS High Light, set light output, 1.0 BF VT5 2 X 4 2 54T5HO GEB10PS High Light, set light output, 1.0 BF VT5 2 X 4 3 54T5HO GEB10PS High Light, set light output, 1.0 BF VT8 2 X 2 1 17 GEB10IS Standard, set light output, 0.88 BF VT8 2 X 2 2 17 GEB10IS Standard, set light output, 0.88 BF VT8 2 X 2 3 17 GEB10IS Standard, set light output, 0.88 BF VT8 2 X 4 1 32 GEB10IS Standard, set light output, 0.88 BF VT8 2 X 4 2 32 GEB10IS Standard, set light output, 0.88 BF VT8 2 X 4 3 32 GEB10IS Standard, set light output, 0.88 BF For other control options, please refer to ordering information. Certain airborne contaminants can diminish integrity of acrylic and polycarbonate. Refer to the Acrylic & Polycarbonate Environmental Compatibility tables on pages 1116-1117 for suitable uses.

Previous Page
Next Page