Product Selection Guide Page 118 Product Selection Guide-11th Edition

26.12" 12.63" PRODUCT INFORMATION PSG11 118 Luminaire Light Output Distribution Voltage Driver Type VMPSS Single Square Corner VMPQS Quad Square Corner VMPSR Single Radius Corner VMPQR Quad Radius Corner HI 1500 nominal delivered-lumens LO 6000 nominal delivered-lumens (blank) Std. 60% up, 40% down 20/80 20% up, 80% down 0/100 0% up, 100% down 120 277 347 EZB eldoLED dims to black (remote driver) Switching LED Color Temperature Mounting Type Overall Suspension Finish Options SCT Single circuit LP830 3000K 80+CRI LP835 3500K 80+ CRI LP840 4000K 80+ CRI F1/ T-bar ceiling (universal mounting bracket) F2/ Hard ceiling 18 18" 24 24" XX XX" Overall suspension is measured from ceiling to bottom of luminaire. C041 White white (low gloss) C110 Painted aluminum (low gloss) C201 Black (low gloss) C099 Custom finish DU Dust cover DL Damp location label GLR Fusing (fast blow) GMF Fusing (slow blow) XXXX Integrated occupancy sensing, daylight dectection and/ or network control available. See Luminaire specification sheet on website for details and option code. ORDERING INFORMATION Specifications subject to change. Example: VMM9 P1 HI 277 EZB SCT LP835 F1/24 C041 VELLUM Construction Extruded aluminum housing. Die-cast aluminum end caps mechanically attach with no exposed fasteners. Source Edge-lit LEDs using light guide technology deliver up to 6000 nominal lumens. Three available color temperature options (3000K, 3500K and 4000K). Optics Softshine-engineered optical system consists of high performance acrylic lens. Dimming Dimming to black standard with eldoLED driver (remotely installed into ceiling). Finish Standard finish for housing and end caps is white, black or painted aluminum. Consult factory for custom colors. Controls Optional nLight-embedded controls allow for constant lumen management (N80) and facilitate simple "plug-and-play" networking and control via CAT-5e cable. Electrical LED light engine consists of modular LED boards and 0-10V dimming driver rated for 50,000 hours to L80 at 25 C ambient temperature. Driver input wattage is 50W. Estimated 1500- 6000 total lumens per luminaire. Specify 120, 277 or 347V. Pre-wired with 16AWG fixture wire. For special circuiting or wire gauge, consult factory. Plug-in electrical connectors included. Validation CSA/CUS listed. FCC part 15 certified. LM-79 tested. Lighting Facts partner. Warranty Five-year limited warranty coverage includes luminaire construction, LED light engine, driver and optional nLight control device. Terms and conditions apply. Packaging 100% post-consumer recycled cardboard box. Biodegradable foam inserts and protective luminaire bag. Recycled kraft paper tape. VELLUM LED Single and Quad Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions (if provided) are shown in inches unless otherwise noted. ADDITIONAL INFORMATION For additional product information, visit www.peerlesslighting.com. LED Suspended www.peerlesslighting.com PEERLESS Vellum LED Quad 360 TOTA L SYSTEM INTE GR AT ION

Previous Page
Next Page