Product Selection Guide Page 1071 Product Selection Guide-11th Edition

1071 PSG11 PRODUCT INFORMATION Intended Use Seamlessly integrates Sensor Switch, nLight and LC&D X-Point relays and control devices into the OnePass wiring system allowing for zone level or luminaire level switching and dimming control. Features with different voltages o C thermoplastic insulation rated 600V grounding conductor Listings UL Listed. RCM MODULAR SYSTEM Notes 1 RCM2 always carries unswitched power through on parallel port and switched output on the switched/dimming port. 2 Refer to the Controls's device type specsheets for temperature and local code requirements. 3 Consult factory for use with other controls devices. 4 nLight devices rated for use on 16-amp branch circuits only. 5 nPS150 & nPS250 are used only when the nLight graphical wall switch is used (nPOD GFX). 6 2LU option can only be used with the PP202P & XP2. 7 1LD option valid with C12S and nIOD options only. 8 C12S option used only with other 820 system components require the integrated CI, CII controls wiring. 9 Consult factory for deep dim applications when <10% dimming is required for use with non-Acuity Brand fixtures or equipment. System 820 Control Module www.relocwiring.com RELOC WIRING SOLUTIONS PRODUCT INFORMATION System 820 Control Module Intended Use Seamlessly integrates Sensor Switch, nLight and LC&D X-Point relays and control devices into the OnePass wiring system allowing for zone level or luminaire level switching and dimming control. Features with different voltage thermoplastic insulation rated 600V grounding conductor Listings UL Listed. RCMKO Series Voltage # of devices Device type 1,2 Switching/Dimming Controls Wiring RCMKO 1-port 120 120V 277 277V 1 Sensor Switch nLight PP20 nPP16 3 SP20 nSP16 3 PP202P nEPP5KO 4 nSP5D 4 LC&D X-Point XP1 XP2 XPDM (blank) Single level switching with unswitched hot 2LU Two level switching with unswitched hot 5 1LD Single level with dimming wires 6 (blank) Not required C12S Integrated CI, CII rated line voltage and signal wires 7,8 ADDITIONAL INFORMATION For additional product information, visit www.relocwiring.com. Example: RCMKO 277 1PP20 ORDERING INFORMATION Specifications subject to change. Example: RCM 120 1 PP20 ADDITIONAL INFORMATION For additional product information, visit www.relocwiring.com. Series Voltage # of devices Device type 2,3 Switching/Dimming Controls Wiring RCM 1-port RCM2 2-port 1 120 120V 277 277V 1 Sensor Switch nLight 4 PP20 nPP16 SP20 nSP16 PP202P nIOD nPS80 LC &D X-Point nPS150 5 XP1 nPS250 5 XP2 XPDM (blank) Single level switching with unswitched hot 2LU Two level switching with unswitched hot 6 1LD Single level with dimming wires 7 (blank) Not required C12S Integrated CI, CII rated line voltage and signal wires 8.9 ORDERING INFORMATION Specifications subject to change. Notes 1 Refer to the Controls's device type specsheets for temperature and local code requirements. 2 Consult factory for use with other controls devices. 3 nPP16 & nSP16 are16-amp rated. 4 nEPP5KO & nSP5D are 5-amp rated. 5 2LU option can only be used with the PP202P & XP2. 6 1LD option valid with C12S and nIOD options only. 7 C12S option used only with other 820 system components require the integrated CI, CII controls wiring. 8 Consult factory for deep dim applications when <10% dimming is required for use with non-Acuity Brand fixtures or equipment. RCM2

Previous Page
Next Page