Product Selection Guide Page 1069 Product Selection Guide-11th Edition

1069 PSG11 PRODUCT INFORMATION OD OnePass Drop Cable MODULAR SYSTEMS OnePass www.relocwiring.com RELOC WIRING SOLUTIONS ADDITIONAL INFORMATION For additional product information, visit www.relocwiring.com. Series Voltage Conductor 2 Length 3 Control Wiring Options Options Finish 8 OD 120 120V 1 208 208V 240 240V 277 277V 1 347 347V 1 480 480V 12/2G Two 12AWG conductors plus one 12AWG ground 12/3G Three 12AWG conductors plus one 12AWG ground 12/4G Four 12AWG conductors plus one 12AWG ground 01 1 ft 05 5 ft 10 10 ft 15 15 ft 20 20 ft 25 25 ft 30 30 ft (blank) Not required C12S Integrated, C1/C11 rated line voltage and signal wires 4 LVC 3-position connector system for 0-10V/DALI wiring 5 (blank) Not required 2N Two circuit two neutral 1 EXT Extreme temperature rating conductors 6 RRL RELOC Ready Luminaire 7 (blank) Not required RD Red BK Black WH White BE Beige ORDERING INFORMATION Specifications subject to change. Example: OD 277 12/2G 15 PRODUCT INFORMATION OnePass Intended Use Splits a branch circuit into two directions. Male/female component that can be used anywhere in the OnePass system. Features insulation rated 600V conductor with different voltages 310.13 (A) DUST COVER Controls-Enabled Wiring wires (0-10V or DALI) multi-circuit 0-24V dimming (0-10V or DALI) Listings UL Listed to U.S. and Canadian safety standards. OSS OnePass Splitter Splice Example: OSS 120 12/4G Series Voltage Conductors 1 Controls Wiring Options Options OSS 120 120V 208 208V 240 240V 277 277V 347 347V 480 480V 12/2G Two 12AWG conductors plus one 12AWG ground 12/4G Four 12AWG conductors plus one 12AWG ground (blank) Not required C12S Integrated, C1/C11 rated line voltage and signal wires 2 LVC 3-position connector system for 0-10V/DALI wiring 3 (blank) Not required EXT Extreme temperature rating conductors 4 ORDERING INFORMATION Specifications subject to change. Notes 1 Conductors available in12/4Gonly. 12AWG will plug into 10AWG product and two neutral (2N) product. 2 C12S available with 12/2G conductors only. 3 Low Voltage cable attached externally to splitter housing. 4 EXT options required for extreme hot and cold temperature applications (-40 to 75C). ADDITIONAL INFORMATION For additional product information, visit www.relocwiring.com. Notes 1 2N available in 277V,120V, and 347V; 12/4G conductors only. 2 Conductors not available in 10AWG. 12AWG will plug into 10AWG product. 3 Standard lengths listed. Consult factory for custom lengths. 4 C12S available with 12/2G conductors only. 5 Low Voltage cable attached externally to cable. 6 EXT options required for extreme hot and cold temperature applications (-40 to 75C). 7 RRL option will require the fixture description to have wiring instruction. See page 113 for ordering information (i.e. RRLA, RRLAE). 8 Colored cable available up to 35 ft. Contact factory for other inishes. Intended Use Allows miscellaneous devices (exits, emergency units, etc.) to become part of the OnePass system to be field installed by contractor. Also a plug-in connection for industrial fixtures that can be prewired by fixture manufacturer or field installed by contractor. Features insulation rated 600V with different voltages 310.13 (A) DUST COVER Controls-Enabled Wiring wires (0-10V or DALI) multi-circuit 0-24 dimming (0-10V or DALI) Listings UL Listed to U.S. and Canadian safety standards.

Previous Page
Next Page