Product Selection Guide Page 1068 Product Selection Guide-11th Edition

PSG11 1068 PRODUCT INFORMATION MODULAR SYSTEMS OC2 OnePass Cable, Two-Port OnePass www.relocwiring.com RELOC WIRING SOLUTIONS ADDITIONAL INFORMATION For additional product information, visit www.relocwiring.com. ADDITIONAL INFORMATION For additional product information, visit www.relocwiring.com. Intended Use The OnePass starter cable 2 port provides the interface between hardwiring and the OnePass system. A converter and extender in one component wired into the homerun junction box brings power to the OCS, OC2, OCU, or OD. Features insulation and all conductors rated at 600V grounding conductor with different voltages Controls-Enabled Wiring wires (0-10V or DALI) multi-circuit 0-24V dimming (0-10V or DALI) system for Sensor Switch, nLight and LC&D XPoint fixture level control Listings UL Listed to U.S. and Canadian safety standards. OSC2 OnePass Starter Cable, Two-Port Example: OSC2 277 12/4G 09 Series Voltage Conductors Length 3 Controls Wiring Options Options Finish 8 OSC2 120 120V 1 208 208V 240 240V 277 277V 1 347 347V 1 480 480V 12/2G Two 12AWG conductors plus one 12AWG ground 12/3G Three 12AWG conductors plus one 12AWG ground 12/4G Four 12AWG conductors plus one 12AWG ground 10/2G Two 10AWG conductors plus one 10AWG ground 10/3G Three 10AWG conductors plus one 10AWG ground 10/4G Four 10AWG conductors plus one 10AWG ground 2 05 5 ft 09 9 ft 15 15 ft 21 21 ft 25 25 ft 31 31 ft 35 35 ft (blank) Not required C12S Integrated, C1/C11 rated line voltage and signal wires 4 CAT5_ Pre-terminated & tested CAT5 cable attached, specify length 5 LVC 3 position connector system for 0-10V/DALI wiring 6 2N Two circuit, two neutral 1 EXT Extreme temperature rating conductor 2,7 RD Red BK Black WH White BE Beige ORDERING INFORMATION Specifications subject to change. PRODUCT INFORMATION OnePass Notes 1 2N available in 120V, 277V, and 347V; 12/4G and 10/4G conductors only. 2 EXT option required for extreme hot and cold temperature applications (-40-75C). 3 Standard lengths listed. Consult factory for custom lengths. 4 C12S available with 12/4G conductors only. 5 CAT5 cable length must be the OC2 length plus the fixture drop length (OCS/OCU/OD). i.e. OC2 277 12/3g 21 CAT527. 6 Low Voltage cable attached externally to cable. 7 EXT not available with 10/4G conductors. 8 Colored cable available up to 35ft. Contact factory for other finishes. Notes 1 2N available in 277V, 120V, and 347V; 12/4G and 10/4G conductors only. 2 EXT not available with 10/4G conductors. 3 Standard lengths listed. Consult factory for custom lengths. 4 C12S available with 12/4G conductors only. 5 CAT5 cable length must be the OC2 length plus the fixture drop length (OCS/OCU/OD). i.e. OC2 277 12/3G 21 CAT527. 6 Low Voltage cable attached externally to cable. 7 EXT option required for extreme hot and cold temperature applications (-40-75C). 8 Colored cable available up to 35ft. Contact factory for other finishes. Series Voltage Conductors Length 3 Control Wiring Options Options Finish 8 OC2 120 120V 1 208 208V 240 240V 277 277V 1 347 347V 1 480 480V 12/2G Two 12AWG conductors plus one 12AWG ground 12/3G Three 12AWG conductors plus one 12AWG ground 12/4G Four 12AWG conductors plus one 12AWG ground 1 10/2G Two 10AWG conductors plus one 10AWG ground 10/3G Three 10AWG conductors plus one 10AWG ground 10/4G Four 10AWG conductors plus one 10AWG ground 1,2 05 5 ft 09 9 ft 15 15 ft 21 21 ft 25 25 ft 31 31 ft 35 35 ft (blank) Not required C12S Integrated, C1/C11 rated line voltage and signal wires 4 CAT5_ Pre-terminated & tested CAT5 cable attached, specify length 5 LVC 3 position connector system for 0-10V/DALI wiring 6 (blank) Not required 2N Two circuit, two neutral 1 EXT Extreme temperatures rating conductors 2,7 (blank) Not required RD Red BK Black WH White BE Beige Example: OC2 277 12/4G 09 ORDERING INFORMATION Specifications subject to change. Intended Use The OnePass cable 2 port is a splitter and cable extender in one easy-to-use component. Used to bring power to OCS, OCU or an OD in industrial applications, or to split a circuit into two directions. Features conductor with different voltages applications (-40C to +75C) DUST COVER Controls-Enabled Wiring wires (0-10V or DALI) multi-circuit 0-24V dimming (0-10V or DALI) system for Sensor Switch, nLight and LC&D XPoint fixture level control Listings UL Listed to U.S. and Canadian safety standards.

Previous Page
Next Page