Product Selection Guide Page 1067 Product Selection Guide-11th Edition

1067 PSG11 PRODUCT INFORMATION Intended Use A plug-in connection for open ceiling fixtures. Prewired by ixture manufacturer or field installed by contractor. Features containing a fully rated ground conductor with different voltages DUST COVER Listings UL Listed to U.S. and Canadian safety standards. OCS Patented OnePass Circuit Selector Unit MODULAR SYSTEMS OnePass www.relocwiring.com RELOC WIRING SOLUTIONS ADDITIONAL INFORMATION For additional product information, visit www.relocwiring.com. Notes 1 TAP position indicates the hot conductor's pin position. 2 2N not available in 208V, 240V, and 480V. 3 Each configuration of 22N and 122N requires 12/4G 2N or 10/4G 2N OnePass components to complete the system. 4 RRL options will require the fixture descripion to have wiring instruction. See page 113 for ordering information (i.e. RRLA,, RRLAE). Example: OCS 277 Series Voltage Conductors Length 6 Options OCS 120 120V 1,4 277 277V 1,4 347 347V 1,4 208 208V 2, 3 240 240V 2,3 480 480V 2,3 (blank) Three 18AWG conductors (including ground) 3,5 18/4G Four 18AWG conductors (including ground) 4 (blank) 6 ft 10 10 ft 15 15 ft 20 20 ft 25 25 ft (blank) White cord BK Black cord IMP IMP connector RRL RELOC Ready Luminaire 7 ADDITIONAL INFORMATION For additional product information, visit www.relocwiring.com. ORDERING INFORMATION Specifications subject to change. PRODUCT INFORMATION Intended Use The OnePass Circuit Unselectable is a plug-in connection for industrial fixtures. The OCU can be prewired by fixture manufacturer or field installed. Features temperature containing a fully rated ground conductor Listings UL Listed to U.S. and Canadian safety standards. OCU OnePass Circuit Unselectable OnePass Series Voltage Tap Positions 1 Length Options OCU 120 120V 277 277V 347 347V 208 208V 240 240V 480 480V For 120, 277, and 347 volts: TAP22N Tap 1 hot; pin position 2 with second neutral 2,3 TAP122N Tap 2 hots; pin position 1 and 2 with first and second neutral 2,3 TAP123 Tap 3 hots; pin positions 1, 2 & 3 For 208, 240, and 480 volts: TAP12 Tap 2 hots; pin positions 1 & 2 (circuit 1) TAP34 Tap 2 hots; pin positions 3 & 4 (circuit 2) TAP1234 Tap 4 hots; pin positions 1, 2, 3 & 4 (circuit 1 & 2) (blank) 6 ft 10 10 ft 15 15 ft 20 20 ft 25 25 ft (blank) White cord BK Black cord RRL RELOC Ready Luminaire 4 ORDERING INFORMATION Specifications subject to change. Example: OCU 277 TAP123 10 Notes 1 120V, 277V, and 347V two-circuit, two-neutral applications require the OCU to pick up the second hot and neutral. 2 For two-circuit 208V, 240V and 480V applications, the OCU TAP34 is required to pick up the 2nd circuit. 3 208V, 240V and 480V options have two selector switches for selection of any 2 of the 3 positions available. 4 120V, 277V, and 347V, and 18/3G options have two selector switches for selecting two tap positions. 5 120V, 277V, and 347V have one selector switch. 6 For standard lengths listed. Consult factory for custom requirements. 7 RRL option will require the fixture description to have wiring instruction. See page 113 for ordering information (i.e. RRLA, RRLAE).

Previous Page
Next Page