Product Selection Guide Page 1014 Product Selection Guide-11th Edition

ORDERING INFORMATION PRODUCT INFORMATION PSG11 1014 INTEGRATED LIGHTING CONTROLS Intended Use Used in conjunction with system enclosure and controller to provide manual and automatic on/offcontrol of all types of lighting loads, and 0-10V dimming control of compatible four-wire fluorescent and non-dim loads. Combine with other Synergy system SYPM power modules to create a complete integrated lighting control solution for any application. Features destructive effects of switching large high-inrush loads (electronic fluorescent and HID) inputs for photocells controller to work with variety of input devices and control any combination of system relays and dimmers the module will continue to operate in fail-safe mode, even if the system controller is removed from the system closure inputs for applications where only digital control using Synergy digital stations is required and 1-10V dim- ming is not needed Listings UL Listed to U.S. and Canadian safety standards. SYNERGY LIGHTING CONTROLS www.synergylightingcontrols.com Series Type Circuit breakers SYPM Module for use with external circuit breakers SYPMB Module with circuit breakers 8L Relay module with eight single-pole 30A relays for 120V, 230V, 277V and 347V operation. Includes low- voltage inputs and 0-10V dimming. (blank) No circuit breakers B1 Six 20A, 120V, 10KAIC breakers B2 Four 20A, 277V, 14KAIC breakers B3 Six 15A, 120V, 10KAIC breakers B4 Four 15A, 277V, 14KAIC breakers B5 Four 20A, 347V, 14KAIC breakers B6 Four 15A, 347V, 14KAIC breakers Power, Input/Output Modules Example: SYPM 8L Series Dimmers/Circuit breakers/voltage SYPMB Dimmers Circuit breakers/ voltage 6D Six dimmers per module B1 Six integral 20A, 120V, 2 KW dimmers w/ 10KAIC breakers B2 Four integral 20A, 277V, 3.5 KW dimmers w/ 14KAIC breakers B3 Six integral 15A, 120V, 1.5 KW dimmers w/ 10KAIC breakers B4 Four integral 15A, 277V, 3.3 KW dimmers w/ 14KAIC breakers B5 Four integral 20A, 120V, 2 KW dimmers w/ 65KAIC breakers ADDITIONAL INFORMATION For additional product information, visit www.synergylightingcontrols.com. SHIPPING WEIGHT 22 lbs. (10 kg) SYPM 8L Relay Module 17 (43.2) 6 (15.2) 2 (5.1) Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. ADDITIONAL INFORMATION For additional product information, visit www.synergylightingcontrols.com. SHIPPING WEIGHT Without breakers 4 lbs. (1.9 kg) With breakers 9 lbs. (4.1 kg) Example: SYPMB 6DB1 ORDERING INFORMATION Specifications subject to change. PRODUCT INFORMATION Intended Use Used in conjunction with system enclosure and controller to provide manual and automatic on/offand line-voltage dimming control of a wide variety of lighting loads. Combine with other Synergy system SYPM power modules to create a complete integrated lighting control solution for any application. Features circuit breakers. Available for 120V, 230V, and 277V ap- plications architectural-grade toriodal filter without field calibration processing techniques minimize effects of poor power quality and prevent noticeable flicker and drift accommodate most lamp and ballast types via the system controller the module will continue to operate in fail-safe mode, even if the system controller is removed from the system Listings UL Listed to U.S. and Canadian safety standards. Power, Input/Output Modules SYPMB 6D Line-Voltage Dimmer Module

Previous Page
Next Page